Search zamdtek

Showing posts with label ROM. Show all posts
Showing posts with label ROM. Show all posts

Sunday, 25 November 2018

How to flash all VIVO androids ‎with only one or two ROMs



VIVO androids just like Tecno Infinix or lenovo. Are android running on MTK through few original original once are using Qaulcom chips.

As MTK you can use many flashing box like nck bogle, miracle box, volcano box to flash the scatter file on bin file to the phones. You can also use software like miracle box cracked, nck cracked, SP tool, and so on to write the scatter file or bin file to the phone.

VIVO androids come in different name and different MTK chip like mt6572, 6575, 6580. Another problem with VIVO androids phone is that refurbished has similar names like S7, S7i, S7iT, Y11 Y11i, Y11it etc.
Looking at the names they sound a like but are not same MTK chip. So

Monday, 19 November 2018

Vibo Phantom 5 mini Hard Reset and Flash.

Vibo Phantom 5 mini pattern pattern unlock and ROM(.pac file) download.



Do you have this phone Vibo Phantom 5 mini that shows pattern, Password or enter PIN lock. The solution is here. If by mistake the phone brick you can download the ROM pac file here.

Vibo Phantom 5 mini Hard Reset and Flashing.

  1. Change your phone for about 80%..
  2. Download Miracle Box Crack from here.
  3. Lean how to use Miracle Box crack here.
  4. Find a better USB cable.
  5. Open Miracle Box interface and Select SPD>>SPD8810/6820..
  6. Click on the Read option up.
  7. Connect SPD android phone holding Volume UP.
  8. It takes about 30 minutes for Miracle Box to backup the pac file from the phone.
  9. Note down the folder where the pac file is saved.
  10. Remove your phone from Computer and phone battery also.
  11. Go back to Miracle Box software and Select Format.
  12. Repeat NO 7 again.
  13. After formatting remove the phone and boot it. It takes time to boot for the first time.
  14. If anything go wrong flash your phone with backup file on download working file here.
  Welcome to use Miracle Box
 (World's First Fuzzy Logic Based Tool)
  Update:16-01-09
  Connected OK.
  Fuzzy Logic Method is very safe and reliable !
  1. Power Off Phone , Remove Battery, Insert Battery Back

Download or request for Vibo phantom 5 Mini .pac file here

  2. Insert USB cable. In some cases Required Hold BootKey
  3. Use Miracle Boot Key In cases Boot key not Find
  4. Battery Should be Charged more then 50%
  Open Port Err:
  ***   the Port be occupied.
  Waiting for USB Port...
  Waiting for USB Port...
  none usbport, maybe driver not installed
  1. Power Off Phone , Remove Battery, Insert Battery Back
  2. Insert USB cable. In some cases Required Hold BootKey
  3. Use Miracle Boot Key In cases Boot key not Find
  4. Battery Should be Charged more then 50%
  Open Port Err:
  ***   the Port be occupied.
  Waiting for USB Port...
  1. Power Off Phone , Remove Battery, Insert Battery Back
  2. Please Hold BootKey(UP and DOWN),Insert USB cable
  3. Use Miracle Boot Key In cases Boot key not Find
  4. Battery Should be Charged more then 50%
  Scanning USB Serial port...
  Waiting for USB Port...
  SU2Serial Port: COM427
  Connecting to Phone,Wait..
  Done.
  Infor: SPRD3
  Initialize boot13...
  CPU    type: 8810/6820
  Flash  type: NAND
  Flash    ID: 00AD00BC
  Flash Model: HYNIX H8BCS0UN0MCR
  Flash  Size: 0x21000000(528.0M)
  Being analyzed,Wait...
  256k(spl),1536k(2ndbl),256k(params),512k(vmjaluna),9m(modem),3840k(fixnv),3840k(backupfixnv),5120k(dsp),3840k(runtimenv),10m(boot),10m(recovery),195m(system),185m(userdata),60m(cache),256k(misc),1m(boot_logo),1m(fastboot_logo),3840k(productinfo),512k(kpanic),512k(simlock),10m(intmemory),1m(boot_logo3)
  Analyzed data Failure.
  none usbport, maybe driver not installed
  1. Power Off Phone , Remove Battery, Insert Battery Back
  2. Please Hold BootKey(UP and DOWN),Insert USB cable
  3. Use Miracle Boot Key In cases Boot key not Find
  4. Battery Should be Charged more then 50%
  Scanning USB Serial port...
  SU2Serial Port: COM427
  Connecting to Phone,Wait..
  Done.
  Infor: SPRD3
  Initialize boot13...
  CPU    type: 8810/6820
  Flash  type: NAND
  Flash    ID: 00AD00BC
  Flash Model: HYNIX H8BCS0UN0MCR
  Flash  Size: 0x21000000(528.0M)
  reading,Wait...
  Read Completed.
>>File save to: C:\Users\ZD Tech\Documents\HTC\Vibo  8810_6820_HYNIX H8BCS0UN0MCR

Read your Vibo phantom 5 mini information and see if is same with the one above to avoid phone brick.

How to flash and download Lenovo A360t Rom scatter file firmware.

Here you are going to learn how to flash and also download Lenovo A360t Android MTK ROM. The firmware is in form of bin, scatter file or image recovery file.



Note: Before you carry out this operation make sure you backup you phone. Zamdtek is not responsible for any damage to your phone during this process. Almost all the solution posted here have been tested in our workshop. It will be nice if you read your phone information and confirm it with the file information.

Why do we flash Android phone's? 

1. Android brick: Brick is a situation when your Android phone is not responding, hanging or can't power.

 2. Your phone has software issues or restarting 

3. Some applications are not responding or working in case of Lenovo A360t where dialer keypads disappeared,. The dialer keypad shows blank. 

4. Your phone enables WiFi automatically and mobile data. 

5. Your Android phone hangs on logo.

6. Your Android phone touches or operates itself automatically. 

How to flash Android phone 


>> If is MTK then you can use Smart Phone Tool (SP Tool), Miracle box, NCK dongle 

Learn how to use sp tool here



Learn how to use Miracle Box here.

Learn how to use NCK dongle here.

>> Download and install all MTK drivers.The installation of drivers sepends on you computer Operating System. If you have Miracle Box, then install MTK drivers from the Miracle Box folder.

>> Get a good working USB cable, ensure your charging port is in good shape not just change but also can transfer files to computer.

>> Download the Rom and extract it. Watch this video above. These phones and Roms have been tested by us

Download Lenovo A360t China version 4.4.2 here

>> Open SP Tool or Miracle Box, Locate the scatter file and click on it.

>>Don't shake the USB while Flashing is in progress other wise your Android phone will damage permanently.

Wednesday, 29 November 2017

How to flash and download Kimfly M13 ROM or flash file

Download Kimfly M13 Stock ROM or firmware


Kimfly M13 ROM



Kimfly M13 specifications

Model                 Kimfly M13
Android version 4.1.2; 7710_4.1.2_C913W_AITAI_1351_en_v20; SDK16
CPU                 SPD 1 core; ARMv7 Processor rev 1 (v7l) sc7710
Display                 480 x 320; DPI: 160; Evaluated Size: 3.6"
Touch screen         Multitouch 2 points
GPU                 Mali-300; ARM; OpenGL ES-CM 1.1 Spreadtrum Build; OpenGL ES 2.0
RAM                512 MB
Flash                 0.176 GB; 8 GB 0.5 GB (0.461 GB actual) (see memory map tab)


Caution: 
We recommend you backup your itel or SPD android phone with Miracle box in .bin format before flashing.
Ensure you read all the instructions careful before you start flashing your SPD android phone. zamdtek is not responsible for any bricked/dead spd android phone.
Look at the SPD android you have, compare it with the picture of the ROM/firmware you  are about to download.
You must download the exact ROM or file or .bin of your SPD android phone, before you load the file for flashing operation.
Flashing a wrong ROM or file or .bin file will not only kill your SPD android phone but will make it not to be detected by any computer.

Kimfly M13 Stock ROM or Flash file

Android Version 5.1

Android Version 6.0
Download

If you encounter 
spd sc7715 flashing failed incomplete partition learn how to fix it here


What you need to flash itel SPD android phones


You need a working laptop or good PC that has no virus.
Download and install SPD Drivers on your PC.
Download and install Research Download or Upgrade download on your PC. We recommend Research Download for smaller itel android phones.
Download and install Miracle Box.
Download and save the SPD android flash file or ROM.

Learn How to flash SPD with Research Download or Upgrade download here

Learn how to use Miracle Box and flash SPD android phone

 Steps

  1. Get a working the same type of SPD android phone.

2.            Connect your Miracle box to the computer.

3.            Get a working USB cable and working brain.

4.            Open the Miracle box interface.

5.            Select Read file.

6.            Hold Up of the android phone.

7.            Connect the phone to USB and allow it to read the flash file.

8.            Save the file to a location where you can remember.

9.            Bring the bricked SPD phone do step 6.

10.         Connect the phone to USB and select write file.

Allow the phone to write the file finish.

How to flash and download Kimfly M10 ROM or flash file

Download Kimfly M10 Stock ROM or firmware

Kimfly M10 ROM



Kimfly M10 specifications
Model                 Kimfly M10
Design: Bar
Screen Resolution: 800×480
Display Type: IPS
Screen: 4.0-4.9″
Camera: < 3MP
Operation System: Android
Feature: Auto Focus, Bluetooth, Build in Flash, Dual Sim Card, Email, FM Radio, GPS Navigation, MP3 Playback, Touch Screen, WiFi
Color: Black, White
OS: Android 4.4
CPU: SPRD 6820
Battery Capacity(mAh): 1000mah
Band: GSM850/900/1800/1900
ROM: 512MB
RAM: 256MB
Earphone: 3.5mm
Language: Multiple Languages

Caution: 
We recommend you backup your itel or SPD android phone with Miracle box in .bin format before flashing.
Ensure you read all the instructions careful before you start flashing your SPD android phone. zamdtek is not responsible for any bricked/dead spd android phone.
Look at the SPD android you have, compare it with the picture of the ROM/firmware you  are about to download.
You must download the exact ROM or file or .bin of your SPD android phone, before you load the file for flashing operation.
Flashing a wrong ROM or file or .bin file will not only kill your SPD android phone but will make it not to be detected by any computer.
                                         

Kimfly M10 Stock ROM or Flash file

Android Version 5.1

Android Version 6.0
Download

If you encounter 
spd sc7715 flashing failed incomplete partition learn how to fix it here


What you need to flash itel SPD android phones


You need a working laptop or good PC that has no virus.
Download and install SPD Drivers on your PC.
Download and install Research Download or Upgrade download on your PC. We recommend Research Download for smaller itel android phones.
Download and install Miracle Box.
Download and save the SPD android flash file or ROM.

Learn How to flash SPD with Research Download or Upgrade download here

Learn how to use Miracle Box and flash SPD android phone

 Steps

  1. Get a working the same type of SPD android phone.

2.            Connect your Miracle box to the computer.

3.            Get a working USB cable and working brain.

4.            Open the Miracle box interface.

5.            Select Read file.

6.            Hold Up of the android phone.

7.            Connect the phone to USB and allow it to read the flash file.

8.            Save the file to a location where you can remember.

9.            Bring the bricked SPD phone do step 6.

10.         Connect the phone to USB and select write file.


Allow the phone to write the file finish.

How to flash and download Kimfly M12 ROM or flash file

Download Kimfly M12 Stock ROM or firmware


Kimfly M12 ROM


Kimfly M12 specifications

Model                 Kimfly M12
Design: Bar
Screen Resolution: 800×480
Display Type: IPS
Screen: 4.0-4.9″
Camera: < 3MP
Operation System: Android
Feature: Auto Focus, Bluetooth, Build in Flash, Dual Sim Card, Email, FM Radio, GPS Navigation, MP3 Playback, Touch Screen, WiFi
Color: Black, White
OS: Android 4.4
CPU: SPRD 6820
Battery Capacity(mAh): 1000mah
Band: GSM850/900/1800/1900
ROM: 512MB
RAM: 256MB
Earphone: 3.5mm
Language: Multiple Languages


Caution: 

We recommend you backup your itel or SPD android phone with Miracle box in .bin format before flashing.
Ensure you read all the instructions careful before you start flashing your SPD android phone. zamdtek is not responsible for any bricked/dead spd android phone.
Look at the SPD android you have, compare it with the picture of the ROM/firmware you  are about to download.
You must download the exact ROM or file or .bin of your SPD android phone, before you load the file for flashing operation.
Flashing a wrong ROM or file or .bin file will not only kill your SPD android phone but will make it not to be detected by any computer.

Kimfly M12 Stock ROM or Flash file

Android Version 5.1

Android Version 6.0
Download

If you encounter 
spd sc7715 flashing failed incomplete partition learn how to fix it here

What you need to flash itel SPD android phones


You need a working laptop or good PC that has no virus.
Download and install SPD Drivers on your PC.
Download and install Research Download or Upgrade download on your PC. We recommend Research Download for smaller itel android phones.
Download and install Miracle Box.
Download and save the SPD android flash file or ROM.

Learn How to flash SPD with Research Download or Upgrade download here

Learn how to use Miracle Box and flash SPD android phone

 Steps

        1.       Get a working the same type of SPD android phone.

2.            Connect your Miracle box to the computer.

3.            Get a working USB cable and working brain.

4.            Open the Miracle box interface.

5.            Select Read file.

6.            Hold Up of the android phone.

7.            Connect the phone to USB and allow it to read the flash file.

8.            Save the file to a location where you can remember.

9.            Bring the bricked SPD phone do step 6.

10.         Connect the phone to USB and select write file.

This solution will help you 
MI Redmi frp bypass

Allow the phone to write the file finish.

About Zamdtek

We developed this site as a result of company expansion. We have over 10 years experience on PC and Phone repair. We are committed to help you both online and workshop. Visiting us will give you hope and satisfaction. We have covered almost every problem you may face with your Phone or PC.

Socialize with Zamdtek:- Twitter | Facebook Page | Google Plus| StumbleUpon| TechForum | Linkedin |Youtube channel| Pinterest