logo

How to flash brick Tecno Camon 12 Pro shows only red charging light

How to flash brick Tecno Camon 12 Pro shows only red charging light
To the advancement in technology about expected things. If you don't follow the trends you may be lost out. Before, flashing a bricked mtk Android phone by downloading a backup file scatter file or BIN file but today what is different.

Flashing Androids 8.1 and above version requires more attention than before.


Do you have a bricked Tecno CC9 or any other android mtk that only shows red indicator and nothing else?


Did you flash a wrong firmware or got your phone bricked?
Did your phone spoil during update process or fell down and damage but LCD still working?


Follow the instruction below to recover your spoiled mtk Android phone.


Step 1. charge your brakes phone until the indicator light shows Green.


Step 2. Get computer already Windows 7 highly recommended.


Step 3. Download and install latest MTK drivers from here.


Step 4. Download and extract the latest Android ROM Tecno camon 12 Pro firmware.


Step 5. Download the phone DA file and watch this video on how to use it.


Step 6. Download latest SP tool Tecno flasher or any other mtk flasher.


Step 7. If you have a  flashing box or dongle use Miracle box CM2 dongle nck box dongle.


Step 8. Connect your android phone to computer with USB when there is a pop to install drivers allow all the necessary drivers to finish installation.


Step 9. Setup your flasher or box, open the interface on the computer, select your phone type if, go to the bootbase and load the Da file downloaded earlier, then load the ROM firmware extracted earlier.


Step 10 if everything is ok installed and connect the phone, then click download/Flash/wright button, connect the phone in power off state, follow the screen instructions and allowed the flasher to write or Flash the phone OS.


If you flash with correct file and your battery is charged, your phone is back to life. Like Ourpage and chat us on whatsapp.