logo

Itel 2180 power solution

Itel 2180 power solution
 Itel 1280 charging but can't power on solution.
Itel 2180 power solution

In this post we are going to show the easiest way you can fix power problem of itel it2180 china phone.

Check all China phones No service, No Network and searching solution


How to repair Itel 2180 power problem.


1. Get you star-screw driver.

2. Get your Rework Station on if you have any.

3. Get you connecting wire ready.

4. Plug your Soldering iron.

5. Get paste ready for applying on the base.

6. Remove the battery and sim of the phone.

7. Loose/disassemble your phone with screw driver

8. Check for water damaged part or rust on the screen legs.

9. Clean the phone with vacuum cleaner or spirit.

10. Test if the light will come up.

11. If it doesn't work then is time to do the real job.


The solution for all itel phones are the same, try locate the resistor controlling the power button, remove or replace the resistor or short both terminals

Take a look at the picture below.



This may be caused by short


Use lead and soldering iron and make short some legs according to the diagram.


Use connecting wire and tap light from the led at the keypad according to the second picture below


If you get the connection right then test the China phone and it will power on.


This has been tested on our workshop before dropping it as a post.


Check Url Itel 2180 power solution

We have show you China phone power solution before today we going to continue with other China phones Power solution..

Note:
Zamdtek is not responsible for any damage done to your phone during repair. Care should be taken to avoid removing others components close to the one you want to change or replace. Handle rework station with care because it can damage anything even your skin

If you don’t get the solution use the comment box.