Search zamdtek

12/27/2018

All China phone easy keypad solution

Tecno T series and other small Itel all the keypads not working solution.

We have show you China phone power solution today we going to bring all China small phone keypads solutions.

Water damaged or liquid damaged China phone can easily cause China phone malfunction continuous displaying white screen. In most cases the China phone will charge but can not power on on. But here the China phone in question will only power on but no keypads will work. You cant even turn it off because all keypads seized.

Note:
Zamdtek is not responsible for any damage done to your phone during repair. Care should be taken to avoid removing others components close to the one you want to change or replace. Handle rework station with care because it can damage anything even your skin

In this post we are going to show the easiest way you can fix keypad problem of any china phone.

Note: Android China phones are not included here.

Itel 2060 all the keypads not working

Itel 5600 all the keypads not working

Itel 5610 all the keypads not working

Itel 6090 all the keypads not working

Itel all the keypads not working

Itel 5320all the keypads not working

Itel 5622 all the keypads not working

Tecno T340 all the keypads not working solution.

Tecno T350 all the keypads not working solution.

Tecno T472 all the keypads not working solution.

Tecno T528 all the keypads not working solution.


Tecno T470 all the keypads not working solution.

Tecno T605 all the keypads not working solution.

Tecno T526 all the keypads not working solution.

Tecno T611 all the keypads not working solution.

Tecno T484 all the keypads not working solution.

Tecno T411 all the keypads not working solution.

Check the difference between Real China phone and Fake China phone

Check Nokia 130 Keypad solution

Tecno Spark K7 frp bypass
Check all China phones No service, No Network and searching solution.

How to repair China phone Keypads issues eg Itel 5600.

1. Get you star-screw driver.

2. Get your Rework Station on if you have any.

3. Get you connecting wire ready.

4. Plug your Soldering iron.

5. Get paste ready for applying on the base.

6. Remove the battery and sim of the phone.

7. Loose/disassemble your phone with screw driver

8. Check for water damaged part or rust on the screen legs.

9. Clean the phone with vacuum cleaner or spirit.

10. Test if the keypads or buttons are working.

11. If it doesn't work then is time to do the real job.




Tecno T410 China phone keypads solution


Take a look at the picture below.

Clean the inner keypads with soft cloth or liquid cleanser.

Test if the buttons are working otherwise Change the Charging Port.
If you don’t get the solution use the comment box.

2 comments:

  1. Tecno t484 battery connector is act...not powering..I read the connector, the continuity is on both sides of the battery connector....please, help

    ReplyDelete

Your comments helps us to improve & others to learn

About Zamdtek

We developed this site as a result of company expansion. We have over 10 years experience on PC and Phone repair. We are committed to help you both online and workshop. Visiting us will give you hope and satisfaction. We have covered almost every problem you may face with your Phone or PC.

Socialize with Zamdtek:- Twitter | Facebook Page | Google Plus| StumbleUpon| TechForum | Linkedin |Youtube channel| Pinterest