Get our Updates

Monday, 14 May 2018

Tecno P5 stuck on recovery Mode solution

The choice of android you buy sometimes depends on your budget. But in most cases it depends on the ore you preferred or what someone recommended for you.

This is not always the case because if you want to buy a phone, think of the durability not affordability. This is because a smart phone you buy for $8 that can last for 4 years is better than the one you buy for $5 that can only last for one year.

That you have a new phone doesn’t mean it will not be faulty. Zamdtek is always here to help you rectify any fault you have with your phone or computer.

As we have shown Tecno P5 power solution we are bringing you a solution to Tecno P5 and Tecno H5 that show a dark background with white messages. The arrow keeps going up and down.

Tecno P5 stuck on recovery Mode solution



Note: 
Zamdtek is not responsible for any damage done to your phone during repair. Care should be taken to avoid removing others components close to the one you want to change or replace. Handle rework station with care because it can damage anything even your skin.

Check How to remove Nokia TA-1010 password 


How to repair Tecno P5 or Tecno H5 stuck in recovery, fastboot Mode.


Ø Get your screw-driver ready.

Ø Get your Rework Station.

Ø Get you soldering iron.

Ø Get your soldering lead.

Ø Loose or disassemble the phone.

Ø Remove or detach the battery.

Ø Check for water damage and clean up the panel.

Ø Replace or put the battery and try power the phone.

Ø If you problem is not solved.

Ø Switch on your Rework Station and remove/change this component.
    There two methods here a) change or replace charging port, b) Change or replace volume.

Tecno P5 stuck on recovery Mode solution


This particular problem according to the owner was cause by wrong charger/adapter. When it was brought the marked ic can only feel very hot when you connect charger. The phone couldn't boot. After changing the ic the Itel 1701 boot normally and no hotness again.

If you get it, your problem is solved.

No comments:

Post a Comment

Your comments helps us to improve & others to learn