Get our Updates

Wednesday, 1 November 2017

Tecno P9 stock ROM or flash file download

Tecno P9 stock ROM


Do you have a Tecno P9 android phone that bricked or can’t power on. Don’t panic because you solution is here. We have in stock all Tecno android smart phone rom and scatter files.

Tecno P9


Caution:  Flashing MTK with wrong rom/file can brick your phone further. If you correct it here otherwise re-flash with correct ROM. We advised to charge your battery to about 80% before you flash.

Tecno P9 specification


We have to bring the specification to you to ensure the smart android phone you are working.

Tecno P9 stock rom


P9-T102-20150311


Download


How to flash or unbrick Tecno P9

  1. Install the MTK drivers to your computer.

  2. Use Miracle flashing Box or SP Tool.

  3. Download the Tecno P9 firmware.

  4. Extract the downloaded rom and locate scatter file.

  5. If you want to use Miracle Box.

  6. Open the Miracle Box interface and select MTK option.

  7. Select the write option.

  8. Click the Browse folder and open the downloaded rom.

  9. Locate scatter the scatter file and click on it.

  10. Plug your Tecno P9 without battery

  11. Install mtk drivers when it popup.

  12. Click Start on Miracle interface and put your battery.

  13. Wait for Tecno P9 to finish flashing.

  14. If you want to use SP tool check the here.

How to setup your android smart phone.


If your Tecno P9 continues to restarts then do manual hard reset. Setup the phone following the screen instructions. Ensure that you skip connect to wireless.

When you setup the phone, then dial *#06# on the keypad to check imei. Also check the baseband.

If the android shows invalid or null imei then use this method and repair it. You can also use MTK engineering to repair the imei

No comments:

Post a Comment

Your comments helps us to improve & others to learn