logo

Tecno P3 & P3S Stock ROM or scatter file

Tecno P3 & P3S Stock ROM or scatter file

Tecno P3 & P3S Stock ROM


Do you have a Tecno P3 & P3S android phone that bricked or can’t power on. Don’t panic because you solution is here. We have in stock all Tecno android smart phone rom and scatter files.

Tecno P3 & P3S


Caution:  Flashing MTK with wrong rom/file can brick your phone further. If you correct it here otherwise re-flash with correct ROM. We advised to charge your battery to about 80% before you flash.

Tecno P3 & P3S specification


We have to bring the specification to you to ensure the smart android phone you are working.

Tecno P3 & P3S stock rom


Tecno P3 ROM

Download

Tecno P3S ROM

Download

How to flash or unbrick Tecno P3 & P3S

  1. Install the MTK drivers to your computer.

  2. Use Miracle flashing Box or SP Tool.

  3. Download the Tecno P3 & P3S firmware.

  4. Extract the downloaded rom and locate scatter file.

  5. If you want to use Miracle Box.

  6. Open the Miracle Box interface and select MTK option.

  7. Select the write option.

  8. Click the Browse folder and open the downloaded rom.

  9. Locate scatter the scatter file and click on it.

  10. Plug your Tecno P3 & P3S without battery

  11. Install mtk drivers when it popup.

  12. Click Start on Miracle interface and put your battery.

  13. Wait for Tecno P3 & P3S to finish flashing.

  14. If you want to use SP tool check the here.

How to setup your android smart phone.


If your Tecno P3 & P3S continues to restarts then do manual hard reset. Setup the phone following the screen instructions. Ensure that you skip connect to wireless.

When you setup the phone, then dial *#06# on the keypad to check imei. Also check the baseband.

If the android shows invalid or null imei then use this method and repair it. You can also use MTK engineering to repair the imei