New solutions

Tuesday, 5 September 2017

Tecno H7 rom or flash file downloads (All versions)

Tecno H7


Do you have a Tecno H7 android phone that bricked or can’t power on. Don’t panic because you solution is here. We have in stock all Tecno android smart phone rom and scatter files.

Caution:  Flashing MTK with wrong rom/file can brick your phone further. If you correct it here otherwise re-flash with correct ROM. We advised to charge your battery to about 80% before you flash.

Tecno H7 specification

We have to bring the specification to you to ensure the smart android phone you are working.

Tecno H7 stock rom

H7 QP16 150226

Download

H7 QP16 140210

Download

H7 QP16 140710

Download



Tecno H7S ROM

H7S LTE MQ16 141104

Download



Tecno H7 Plus rom

H7 Plus QP16

Download


How to flash or unbrick Tecno H7

  1. Install the MTK drivers to your computer.

  2. Use Miracle flashing Box or SP Tool.

  3. Download the Tecno H7 firmware.

  4. Extract the downloaded rom and locate scatter file.

  5. If you want to use Miracle Box.

  6. Open the Miracle Box interface and select MTK option.

  7. Select the write option.

  8. Click the Browse folder and open the downloaded rom.

  9. Locate scatter the scatter file and click on it.

  10. Plug your Tecno H7 without battery

  11. Install mtk drivers when it popup.

  12. Click Start on Miracle interface and put your battery.

  13. Wait for Tecno H7 to finish flashing.

  14. If you want to use SP tool check the here.


How to setup your android smart phone.


If your Tecno H7 continues to restarts then do manual hard reset. Setup the phone following the screen instructions. Ensure that you skip connect to wireless.

When you setup the phone, then dial *#06# on the keypad to check imei. Also check the baseband.

If the android shows invalid or null imei then use this method and repair it. You can also use MTK engineering to repair the imei.

No comments:

Post a Comment

Your comments helps us to improve & others to learn