Get our Updates

Sunday, 10 September 2017

Tecno W3 rom or flash file downloads

Tecno W3 rom or flash file downloads


Do you have a Tecno W3 android phone that bricked or can’t power on. Don’t panic because you solution is here. We have in stock all Tecno android smart phone rom and scatter files.

Tecno W3

Tecno w3 flashing


Caution:  Flashing MTK with wrong rom/file can brick your phone further. If you correct it here otherwise re-flash with correct ROM. We advised to charge your battery to about 80% before you flash.

Tecno W3 specification


We have to bring the specification to you to ensure the smart android phone you are working.

Tecno W3 stock rom


W3-H806-A1-M-HIOS-160901V46

Download

W3-H806-A1-M-HIOS-20160612



Download






How to flash or unbrick Tecno W3



  1. Install the MTK drivers to your computer.

  2. Use Miracle flashing Box or SP Tool.

  3. Download the Tecno W3 firmware.

  4. Extract the downloaded rom and locate scatter file.

  5. If you want to use Miracle Box.

  6. Open the Miracle Box interface and select MTK option.

  7. Select the write option.

  8. Click the Browse folder and open the downloaded rom.

  9. Locate scatter the scatter file and click on it.

  10. Plug your Tecno W3 without battery

  11. Install mtk drivers when it popup.

  12. Click Start on Miracle interface and put your battery.

  13. Wait for Tecno W3 to finish flashing.

  14. If you want to use SP tool check the here.

How to setup your android smart phone.


If your Tecno W3 continues to restarts then do manual hard reset. Setup the phone following the screen instructions. Ensure that you skip connect to wireless.

When you setup the phone, then dial *#06# on the keypad to check imei. Also check the baseband.

If the android shows invalid or null imei then use this method and repair it. You can also use MTK engineering to repair the imei.

Infinix X553 Hot 3 4G LTE rom or flash file download

Infinix X553 Hot 3 LTE rom or flash file download


Do you have a Infinix X553 Hot 3 LTE android phone that bricked or can’t power on. Don’t panic because you solution is here. We have in stock all Infinix android smart phone rom and scatter files.

Infinix X553 Hot 3

Infinix X553 Hot 3




Caution:  Flashing MTK with wrong rom/file can brick your phone further. If you correct it here otherwise re-flash with correct ROM. We advised to charge your battery to about 80% before you flash.

Infinix X553 Hot 3 specification


We have to bring the specification to you to ensure the smart android phone you are working.

Infinix X553 Hot 3 Stock ROM

X553 A1 variant

Download

X553 A2 variant

Download


How to flash or unbrick Infinix X510 Hot 2



  1. Install the MTK drivers to your computer.

  2. Use Miracle flashing Box or SP Tool.

  3. Download the Infinix X553 Hot 3 firmware.

  4. Extract the downloaded rom and locate scatter file.

  5. If you want to use Miracle Box.

  6. Open the Miracle Box interface and select MTK option.

  7. Select the write option.

  8. Click the Browse folder and open the downloaded rom.

  9. Locate scatter the scatter file and click on it.

  10. Plug your Infinix X553 Hot 3 without battery

  11. Install mtk drivers when it popup.

  12. Click Start on Miracle interface and put your battery.

  13. Wait for Infinix X553 Hot 3 to finish flashing.

  14. If you want to use SP tool check the here.

How to setup your android smart phone.


If your Infinix X553 Hot 3 4G LTE continues to restarts then do manual hard reset. Setup the phone following the screen instructions. Ensure that you skip connect to wireless.

When you setup the phone, then dial *#06# on the keypad to check imei. Also check the baseband.

If the android shows invalid or null imei then use this method and repair it. You can also use MTK engineering to repair the imei.

Infinix X552 Zero 3 or flash file download

Infinix X552 Zero 3 rom or flash file download


Do you have a Infinix X552 Zero 3 android phone that bricked or can’t power on. Don’t panic because you solution is here. We have in stock all Infinix android smart phone rom and scatter files.

Infinix X552 Zero 3

infinix X552 zero 3


Caution:  Flashing MTK with wrong rom/file can brick your phone further. If you correct it here otherwise re-flash with correct ROM. We advised to charge your battery to about 80% before you flash.

Infinix X552 Zero 3 specification


We have to bring the specification to you to ensure the smart android phone you are working.

Infinix X552 Zero 3 Stock rom

XOS interface

X552 H952 AE1 variant

Download

Infinix X552 Zero 3 Stock rom

XOS interface

X552 H952 BF1 variant

Download

 


How to flash or unbrick Infinix X552 Zero 3



  1. Install the MTK drivers to your computer.

  2. Use Miracle flashing Box or SP Tool.

  3. Download the Infinix X552 Zero 3 firmware.

  4. Extract the downloaded rom and locate scatter file.

  5. If you want to use Miracle Box.

  6. Open the Miracle Box interface and select MTK option.

  7. Select the write option.

  8. Click the Browse folder and open the downloaded rom.

  9. Locate scatter the scatter file and click on it.

  10. Plug your Infinix X552 without battery

  11. Install mtk drivers when it popup.

  12. Click Start on Miracle interface and put your battery.

  13. Wait for Infinix X552 zero 3 to finish flashing.

  14. If you want to use SP tool check the here.


How to setup your android smart phone.


If your Infinix X552 zero 3 continues to restarts then do manual hard reset. Setup the phone following the screen instructions. Ensure that you skip connect to wireless.

When you setup the phone, then dial *#06# on the keypad to check imei. Also check the baseband.

If the android shows invalid or null imei then use this method and repair it. You can also use MTK engineering to repair the imei.

Infinix X554 Hot 3 rom or flash file download

Infinix X554 Hot 3 rom or flash file download


Do you have a Infinix X554 Hot 3 android phone that bricked or can’t power on. Don’t panic because you solution is here. We have in stock all Infinix android smart phone rom and scatter files.

Infinix X554 Hot 3

infinix X554



Caution:  Flashing MTK with wrong rom/file can brick your phone further. If you correct it here otherwise re-flash with correct ROM. We advised to charge your battery to about 80% before you flash.

Infinix X554 Hot 2 specification


We have to bring the specification to you to ensure the smart android phone you are working.

Infinix X554 Hot 3 Stock ROM

X554-W90918-A1-L-20160407

Download

X554-W90918-A2-L-20160204



Download


How to flash or unbrick Infinix X510 Hot 2

  1. Install the MTK drivers to your computer.

  2. Use Miracle flashing Box or SP Tool.

  3. Download the Infinix X554 Hot 3 firmware.

  4. Extract the downloaded rom and locate scatter file.

  5. If you want to use Miracle Box.

  6. Open the Miracle Box interface and select MTK option.

  7. Select the write option.

  8. Click the Browse folder and open the downloaded rom.

  9. Locate scatter the scatter file and click on it.

  10. Plug your Infinix X554 Hot 3 without battery

  11. Install mtk drivers when it popup.

  12. Click Start on Miracle interface and put your battery.

  13. Wait for Infinix X554 Hot 3 to finish flashing.

  14. If you want to use SP tool check the here.

How to setup your android smart phone.


If your Infinix X554 Hot 3 continues to restarts then do manual hard reset. Setup the phone following the screen instructions. Ensure that you skip connect to wireless.

When you setup the phone, then dial *#06# on the keypad to check imei. Also check the baseband.

If the android shows invalid or null imei then use this method and repair it. You can also use MTK engineering to repair the imei.

Infinix X551 hot note rom or flash file download

Infinix X551 hot note rom or flash file download


Do you have a Infinix X510 Hot 2 android phone that bricked or can’t power on. Don’t panic because you solution is here. We have in stock all Infinix android smart phone rom and scatter files.

Infinix X551 Hot Note

infinix X551



Caution:  Flashing MTK with wrong rom/file can brick your phone further. If you correct it here otherwise re-flash with correct ROM. We advised to charge your battery to about 80% before you flash.

Infinix X551 Hot 2 specification


We have to bring the specification to you to ensure the smart android phone you are working.

Infinix X551 Hot Note Stock ROM

Android 4.4.2 kitkat 16+1

X551-G808-A1-kk-20160720

Download

Android 5.1 Lollipop XUI 16+1

X551-G808-BC-L-20160720

Download



Infinix X551 Hot Note Stock ROM

Android 4.4.2 kitkat 16+2 & 32+2

Download

Android 5.1 Lollipop XUI 16+2 & 32+2

Download


How to flash or unbrick Infinix X551 Hot Note

  1. Install the MTK drivers to your computer.

  2. Use Miracle flashing Box or SP Tool.

  3. Download the Infinix X551 firmware.

  4. Extract the downloaded rom and locate scatter file.

  5. If you want to use Miracle Box.

  6. Open the Miracle Box interface and select MTK option.

  7. Select the write option.

  8. Click the Browse folder and open the downloaded rom.

  9. Locate scatter the scatter file and click on it.

  10. Plug your Infinix X551 without battery

  11. Install mtk drivers when it popup.

  12. Click Start on Miracle interface and put your battery.

  13. Wait for Infinix X551 to finish flashing.

  14. If you want to use SP tool check the here.

How to setup your android smart phone.


If your Infinix X551 Hot Note continues to restarts then do manual hard reset. Setup the phone following the screen instructions. Ensure that you skip connect to wireless.

When you setup the phone, then dial *#06# on the keypad to check imei. Also check the baseband.

If the android shows invalid or null imei then use this method and repair it. You can also use MTK engineering to repair the imei.

Infinix Note 3 X601 rom or flash file download

Infinix Note 3 X601 rom or flash file download


Do you have a Infinix X601 android phone that bricked or can’t power on. Don’t panic because you solution is here. We have in stock all Infinix android smart phone rom and scatter files.

Infinix X601

Infinix X601



Caution:  Flashing MTK with wrong rom/file can brick your phone further. If you correct it here otherwise re-flash with correct ROM. We advised to charge your battery to about 80% before you flash.

Infinix X601 specification


We have to bring the specification to you to ensure the smart android phone you are working.

Infinix X601 Stock ROM

X601-H536-A1-M-20160607

Download

X601-H537-A1-M-20160712V10

Download

X601-H537A1-TEST-170120V48

Download

How to flash or unbrick Infinix Note 3 X601

  1. Install the MTK drivers to your computer.

  2. Use Miracle flashing Box or SP Tool.

  3. Download the Infinix X601 firmware.

  4. Extract the downloaded rom and locate scatter file.

  5. If you want to use Miracle Box.

  6. Open the Miracle Box interface and select MTK option.

  7. Select the write option.

  8. Click the Browse folder and open the downloaded rom.

  9. Locate scatter the scatter file and click on it.

  10. Plug your Infinix X601 without battery

  11. Install mtk drivers when it popup.

  12. Click Start on Miracle interface and put your battery.

  13. Wait for Infinix X601 to finish flashing.

  14. If you want to use SP tool check the here.

How to setup your android smart phone.


If your Infinix Note 3 X601 continues to restarts then do manual hard reset. Setup the phone following the screen instructions. Ensure that you skip connect to wireless.

When you setup the phone, then dial *#06# on the keypad to check imei. Also check the baseband.

If the android shows invalid or null imei then use this method and repair it. You can also use MTK engineering to repair the imei.

Saturday, 9 September 2017

Infinix Note 2 X600 rom or flash file download

Infinix Note 2 X600 software soluotion


Do you have a Infinix X600 android phone that bricked or can’t power on. Don’t panic because you solution is here. We have in stock all Infinix android smart phone rom and scatter files.

Infinix X600

infinix X600




Caution:  Flashing MTK with wrong rom/file can brick your phone further. If you correct it here otherwise re-flash with correct ROM. We advised to charge your battery to about 80% before you flash.

Infinix X600 specification


We have to bring the specification to you to ensure the smart android phone you are working.

Infinix X600 Stock ROM

X600-H533-A1-M-20160720V17 (XOS)

Download

X600-H533-B1-M-20160224(XOS)

Download

X600-H532-A1-L-20160120 (XOS)

Download


How to flash or unbrick Infinix Note 2 X600



  1. Install the MTK drivers to your computer.

  2. Use Miracle flashing Box or SP Tool.

  3. Download the Infinix X600 firmware.

  4. Extract the downloaded rom and locate scatter file.

  5. If you want to use Miracle Box.

  6. Open the Miracle Box interface and select MTK option.

  7. Select the write option.

  8. Click the Browse folder and open the downloaded rom.

  9. Locate scatter the scatter file and click on it.

  10. Plug your Infinix X600 without battery

  11. Install mtk drivers when it popup.

  12. Click Start on Miracle interface and put your battery.

  13. Wait for Infinix X600 to finish flashing.

  14. If you want to use SP tool check the here.


How to setup your android smart phone.


If your Infinix Note 2 X600 continues to restarts then do manual hard reset. Setup the phone following the screen instructions. Ensure that you skip connect to wireless.

When you setup the phone, then dial *#06# on the keypad to check imei. Also check the baseband.

If the android shows invalid or null imei then use this method and repair it. You can also use MTK engineering to repair the imei.

Friday, 8 September 2017

Infinix X510 rom or flash file download

Infinix X510 Hot 2 hangng or software solution


Do you have a Infinix X510 Hot 2 android phone that bricked or can’t power on. Don’t panic because you solution is here. We have in stock all Infinix android smart phone rom and scatter files.

Infinix X510 Hot 2

infinix hot 2 X510



Caution:  Flashing MTK with wrong rom/file can brick your phone further. If you correct it here otherwise re-flash with correct ROM. We advised to charge your battery to about 80% before you flash.

Infinix X510 Hot 2 specification


We have to bring the specification to you to ensure the smart android phone you are working.

Infinix X510 Hot 2 Stock ROM

Android 5.1 lollipop

X510-D5110-Androidone-20150524

Download


Android 6.0 Mashmallow

X510-D5110-M-Androidone-20160315

Download


How to flash or unbrick Infinix X510 Hot 2

  1. Install the MTK drivers to your computer.

  2. Use Miracle flashing Box or SP Tool.

  3. Download the Infinix X510 Hot 2 firmware.

  4. Extract the downloaded rom and locate scatter file.

  5. If you want to use Miracle Box.

  6. Open the Miracle Box interface and select MTK option.

  7. Select the write option.

  8. Click the Browse folder and open the downloaded rom.

  9. Locate scatter the scatter file and click on it.

  10. Plug your Infinix X510 Hot 2 without battery

  11. Install mtk drivers when it popup.

  12. Click Start on Miracle interface and put your battery.

  13. Wait for Infinix X510 Hot 2 to finish flashing.

  14. If you want to use SP tool check the here.

How to setup your android smart phone.

If your Infinix X510 Hot 2 continues to restarts then do manual hard reset. Setup the phone following the screen instructions. Ensure that you skip connect to wireless.

When you setup the phone, then dial *#06# on the keypad to check imei. Also check the baseband.

If the android shows invalid or null imei then use this method and repair it. You can also use MTK engineering to repair the imei.

Infinix X602 rom or flash file download

Infinix X602 zero 4 plus rom or flash file download


Do you have a Infinix X602 zero 4 plus android phone that bricked or can’t power on. Don’t panic because you solution is here. We have in stock all Infinix android smart phone rom and scatter files.

Infinix X602



infinix X602


Caution:  For infinix x602 we recommend Miracle box only for flashing. Flashing MTK with wrong rom/file can brick your phone further. If you correct it here otherwise re-flash with correct ROM. We advised to charge your battery to about 80% before you flash.

Infinix X602 zero 4 plus specification


We have to bring the specification to you to ensure the smart android phone you are working.

Infinix X602 Stock ROM

Android 6.0 Marshmallow

X602-H972A1C1-M-161213V149

Download

X602-H972A1-M-161115V119

Download



Android 7.1.1 Nougat

X602-H972AC-N-170518C29

Download


How to flash or unbrick Infinix X602



  1. Install the MTK drivers to your computer.

  2. Use Miracle flashing Box or SP Tool.

  3. Download the Infinix X602 firmware.

  4. Extract the downloaded rom and locate scatter file.

  5. If you want to use Miracle Box.

  6. Open the Miracle Box interface and select MTK option.

  7. Select the write option.

  8. Click the Browse folder and open the downloaded rom.

  9. Locate scatter the scatter file and click on it.

  10. Plug your Infinix X602 without battery

  11. Install mtk drivers when it popup.

  12. Click Start on Miracle interface and put your battery.

  13. Wait for Infinix X602 to finish flashing.

  14. If you want to use SP tool check the here.


How to setup your android smart phone.


If your Infinix X602 zero 4 plus continues to restarts then do manual hard reset. Setup the phone following the screen instructions. Ensure that you skip connect to wireless.

When you setup the phone, then dial *#06# on the keypad to check imei. Also check the baseband.

If the android shows invalid or null imei then use this method and repair it. You can also use MTK engineering to repair the imei.

Infinix X521 rom or flash file download

Infinix X521 rom or flash file download


Do you have a Infinix X521 android phone that bricked or can’t power on. Don’t panic because you solution is here. We have in stock all Infinix android smart phone rom and scatter files.

Infinix X521

infinix X521




Caution:  Flashing MTK with wrong rom/file can brick your phone further. If you correct it here otherwise re-flash with correct ROM. We advised to charge your battery to about 80% before you flash.

Infinix X521 specification


We have to bring the specification to you to ensure the smart android phone you are working.

Infinix X521 Stock ROM

X521-J5088EG-N-170524V19

Download

X521-J5088-A1-M-160712V14

Download

X521-J5088-C1-M-160929v*9

Download


How to flash or unbrick Infinix X521



  1. Install the MTK drivers to your computer.

  2. Use Miracle flashing Box or SP Tool.

  3. Download the Infinix X521 firmware.

  4. Extract the downloaded rom and locate scatter file.

  5. If you want to use Miracle Box.

  6. Open the Miracle Box interface and select MTK option.

  7. Select the write option.

  8. Click the Browse folder and open the downloaded rom.

  9. Locate scatter the scatter file and click on it.

  10. Plug your Infinix X521 without battery

  11. Install mtk drivers when it popup.

  12. Click Start on Miracle interface and put your battery.

  13. Wait for Infinix X521 to finish flashing.

  14. If you want to use SP tool check the here.


How to setup your android smart phone.


If your Infinix X521 continues to restarts then do manual hard reset. Setup the phone following the screen instructions. Ensure that you skip connect to wireless.

When you setup the phone, then dial *#06# on the keypad to check imei. Also check the baseband.

If the android shows invalid or null imei then use this method and repair it. You can also use MTK engineering to repair the imei.

Infinix X555 rom or flash file download

Infinix X555 Zero 4 rom or flash file download


Do you have a Infinix X555 Zero 4 android phone that bricked or can’t power on. Don’t panic because you solution is here. We have in stock all Infinix android smart phone rom and scatter files.

Infinix X555 Zero 4


                          Infinix X555 Zero 4


Caution:  Flashing MTK with wrong rom/file can brick your phone further. If you correct it here otherwise re-flash with correct ROM. We advised to charge your battery to about 80% before you flash.

Infinix X555 Zero 4 specification


We have to bring the specification to you to ensure the smart android phone you are working.

Infinix X555 Zero 4 Stock ROM

X555-H538A1-N170331

Download

X555-H538A1-M-161207V161

Download

X555-H538B1-M-161202V147

Download


How to flash or unbrick Infinix X555 Zero 4

  1. Install the MTK drivers to your computer.

  2. Use Miracle flashing Box or SP Tool.

  3. Download the Infinix X555 firmware.

  4. Extract the downloaded rom and locate scatter file.

  5. If you want to use Miracle Box.

  6. Open the Miracle Box interface and select MTK option.

  7. Select the write option.

  8. Click the Browse folder and open the downloaded rom.

  9. Locate scatter the scatter file and click on it.

  10. Plug your Infinix X555 without battery

  11. Install mtk drivers when it popup.

  12. Click Start on Miracle interface and put your battery.

  13. Wait for Infinix X555 to finish flashing.

  14. If you want to use SP tool check the here.


How to setup your android smart phone.

If your Infinix X555 Zero 4 continues to restarts then do manual hard reset. Setup the phone following the screen instructions. Ensure that you skip connect to wireless.

When you setup the phone, then dial *#06# on the keypad to check imei. Also check the baseband.

If the android shows invalid or null imei then use this method and repair it. You can also use MTK engineering to repair the imei.

Infinix X801 rom or flash file download

Infinix X801 rom or flash file download


Do you have a Infinix X801 android phone that bricked or can’t power on. Don’t panic because you solution is here. We have in stock all Infinix android smart phone rom and scatter files.

Infinix X801

      Infinix X801





Caution:  Flashing MTK with wrong rom/file can brick your phone further. If you correct it here otherwise re-flash with correct ROM. We advised to charge your battery to about 80% before you flash.

Infinix X801 specification


We have to bring the specification to you to ensure the smart android phone you are working.

Infinix X801 Stock ROM

X800 A2200 20140523 V2.0.7

Download


How to flash or unbrick Infinix X801

  1. Install the MTK drivers to your computer.

  2. Use Miracle flashing Box or SP Tool.

  3. Download the Infinix X801 firmware.

  4. Extract the downloaded rom and locate scatter file.

  5. If you want to use Miracle Box.

  6. Open the Miracle Box interface and select MTK option.

  7. Select the write option.

  8. Click the Browse folder and open the downloaded rom.

  9. Locate scatter the scatter file and click on it.

  10. Plug your Infinix X801 without battery

  11. Install mtk drivers when it popup.

  12. Click Start on Miracle interface and put your battery.

  13. Wait for Infinix X801 to finish flashing.

  14. If you want to use SP tool check the here.

How to setup your android smart phone.

If your Infinix X801 continues to restarts then do manual hard reset. Setup the phone following the screen instructions. Ensure that you skip connect to wireless.

When you setup the phone, then dial *#06# on the keypad to check imei. Also check the baseband.

If the android shows invalid or null imei then use this method and repair it. You can also use MTK engineering to repair the imei.

Infinix X511 rom or flash file download

Infinix X511 rom or flash file download


Do you have a Infinix X511 android phone that bricked or can’t power on. Don’t panic because you solution is here. We have in stock all Infinix android smart phone rom and scatter files.

Infinix X511

infinix x511



Caution:  Flashing MTK with wrong rom/file can brick your phone further. If you correct it here otherwise re-flash with correct ROM. We advised to charge your battery to about 80% before you flash.

Infinix X511 specification


We have to bring the specification to you to ensure the smart android phone you are working.

Infinix X511 Stock ROM

X511-W501-L-Fr-20160612

Download


How to flash or unbrick Infinix X511

  1. Install the MTK drivers to your computer.

  2. Use Miracle flashing Box or SP Tool.

  3. Download the Infinix X511 firmware.

  4. Extract the downloaded rom and locate scatter file.

  5. If you want to use Miracle Box.

  6. Open the Miracle Box interface and select MTK option.

  7. Select the write option.

  8. Click the Browse folder and open the downloaded rom.

  9. Locate scatter the scatter file and click on it.

  10. Plug your Infinix X511 without battery

  11. Install mtk drivers when it popup.

  12. Click Start on Miracle interface and put your battery.

  13. Wait for Infinix X511 to finish flashing.

  14. If you want to use SP tool check the here.

How to setup your android smart phone.

If your Infinix X511 continues to restarts then do manual hard reset. Setup the phone following the screen instructions. Ensure that you skip connect to wireless.

When you setup the phone, then dial *#06# on the keypad to check imei. Also check the baseband.

If the android shows invalid or null imei then use this method and repair it. You can also use MTK engineering to repair the imei.

Thursday, 7 September 2017

Infinix X800 rom or flash file download

Infinix X800 rom or flash file download


Do you have a Infinix X801 android phone that bricked or can’t power on. Don’t panic because you solution is here. We have in stock all Infinix android smart phone rom and scatter files.

Infinix X800

infinix X800




Caution:  Flashing MTK with wrong rom/file can brick your phone further. If you correct it here otherwise re-flash with correct ROM. We advised to charge your battery to about 80% before you flash.

Infinix X800 specification


We have to bring the specification to you to ensure the smart android phone you are working.

Infinix X800 Stock ROM

X800

Download


How to flash or unbrick Infinix X800



  1. Install the MTK drivers to your computer.

  2. Use Miracle flashing Box or SP Tool.

  3. Download the Infinix X800 firmware.

  4. Extract the downloaded rom and locate scatter file.

  5. If you want to use Miracle Box.

  6. Open the Miracle Box interface and select MTK option.

  7. Select the write option.

  8. Click the Browse folder and open the downloaded rom.

  9. Locate scatter the scatter file and click on it.

  10. Plug your Infinix X800 without battery

  11. Install mtk drivers when it popup.

  12. Click Start on Miracle interface and put your battery.

  13. Wait for Infinix X800 to finish flashing.

  14. If you want to use SP tool check the here.


How to setup your android smart phone.


If your Infinix X800 continues to restarts then do manual hard reset. Setup the phone following the screen instructions. Ensure that you skip connect to wireless.

When you setup the phone, then dial *#06# on the keypad to check imei. Also check the baseband.

If the android shows invalid or null imei then use this method and repair it. You can also use MTK engineering to repair the imei.

Infinix X570 rom or flash file download

Infinix X570 rom or flash file download


Do you have a Infinix X570 android phone that bricked or can’t power on. Don’t panic because you solution is here. We have in stock all Infinix android smart phone rom and scatter files.

Infinix Alpha X570 rom




Caution:  Flashing MTK with wrong rom/file can brick your phone further. If you correct it here otherwise re-flash with correct ROM. We advised to charge your battery to about 80% before you flash.

Infinix X570 specification


We have to bring the specification to you to ensure the smart android phone you are working.

Infinix X579 Stock ROM

X570-S9301-20140515

Download


How to flash or unbrick Infinix X570

  1. Install the MTK drivers to your computer.

  2. Use Miracle flashing Box or SP Tool.

  3. Download the Infinix X570 firmware.

  4. Extract the downloaded rom and locate scatter file.

  5. If you want to use Miracle Box.

  6. Open the Miracle Box interface and select MTK option.

  7. Select the write option.

  8. Click the Browse folder and open the downloaded rom.

  9. Locate scatter the scatter file and click on it.

  10. Plug your Infinix X570 without battery

  11. Install mtk drivers when it popup.

  12. Click Start on Miracle interface and put your battery.

  13. Wait for Infinix X570 to finish flashing.

  14. If you want to use SP tool check the here.

How to setup your android smart phone.

If your Infinix X570 continues to restarts then do manual hard reset. Setup the phone following the screen instructions. Ensure that you skip connect to wireless.

When you setup the phone, then dial *#06# on the keypad to check imei. Also check the baseband.

If the android shows invalid or null imei then use this method and repair it. You can also use MTK engineering to repair the imei.

Inifinix X557 Hot 4 rom or flash file downloads

Inifinix X557 Hot 4 rom or flash file downloads (All versions)


Do you have a an Inifinix X557 Hot 4 droid phone that bricked or can’t power on. Don’t panic because you solution is here. We have in stock all infinix android smart phone rom and scatter files.

Inifinix X557 Hot 4

infinix X557 Hot 4




Caution:  Flashing MTK with wrong rom/file can brick your phone further. If you correct it here otherwise re-flash with correct ROM. We advised to charge your battery to about 80% before you flash.

Inifinix X557 Hot 4 specification


We have to bring the specification to you to ensure the smart android phone you are working.

Inifinix X557 Hot 4 stock rom


X557-H807-A1-D1-M-170110V194

Download

X557-H807-A1-D1-M-161209V185

Download

X557-H807-A1-D1-M-160902V81

Download

X557-H807-A1-D1-M-160825V57

Download

X557-H807B1-E1-M1700110V151

Download

X557-H807B1-E1-M-161213V147

Download

X557-H807-B1-M-160902V68

Download


How to flash or unbrick Inifinix X557 Hot 4

  1. Install the MTK drivers to your computer.

  2. Use Miracle flashing Box or SP Tool.

  3. Download the Inifinix X557 Hot 4 firmware.

  4. Extract the downloaded rom and locate scatter file.

  5. If you want to use Miracle Box.

  6. Open the Miracle Box interface and select MTK option.

  7. Select the write option.

  8. Click the Browse folder and open the downloaded rom.

  9. Locate scatter the scatter file and click on it.

  10. Plug your Inifinix X557 Hot 4 without battery

  11. Install mtk drivers when it popup.

  12. Click Start on Miracle interface and put your battery.

  13. Wait for Inifinix X557 Hot 4 to finish flashing.

  14. If you want to use SP tool check the here.

How to setup your android smart phone.

If your Inifinix X557 Hot 4 continues to restarts then do manual hard reset. Setup the phone following the screen instructions. Ensure that you skip connect to wireless.

When you setup the phone, then dial *#06# on the keypad to check imei. Also check the baseband.

If the android shows invalid or null imei then use this method and repair it. You can also use MTK engineering to repair the imei.

Infinix X1000 rom or flash file download

Infinix X1000 rom or flash file download


Do you have a Infinix X1000 android phone that bricked or can’t power on. Don’t panic because you solution is here. We have in stock all Infinix android smart phone rom and scatter files.

Infinix X1000

infinix X1000




Caution:  Flashing MTK with wrong rom/file can brick your phone further. If you correct it here otherwise re-flash with correct ROM. We advised to charge your battery to about 80% before you flash.

Infinix X1000 specification


We have to bring the specification to you to ensure the smart android phone you are working.

Infinix X1000 Stock ROM

X1000-P6001-20140108

Download


How to flash or unbrick Infinix X1000



  1. Install the MTK drivers to your computer.

  2. Use Miracle flashing Box or SP Tool.

  3. Download the Infinix X1000 firmware.

  4. Extract the downloaded rom and locate scatter file.

  5. If you want to use Miracle Box.

  6. Open the Miracle Box interface and select MTK option.

  7. Select the write option.

  8. Click the Browse folder and open the downloaded rom.

  9. Locate scatter the scatter file and click on it.

  10. Plug your Infinix X1000 without battery

  11. Install mtk drivers when it popup.

  12. Click Start on Miracle interface and put your battery.

  13. Wait for Infinix X1000 to finish flashing.

  14. If you want to use SP tool check the here.


How to setup your android smart phone.


If your Infinix X1000 continues to restarts then do manual hard reset. Setup the phone following the screen instructions. Ensure that you skip connect to wireless.

When you setup the phone, then dial *#06# on the keypad to check imei. Also check the baseband.

If the android shows invalid or null imei then use this method and repair it. You can also use MTK engineering to repair the imei.

Infinix X556 Hot 4 rom or flash file download

infinix X556


Do you have a Infinix X556 android phone that bricked or can’t power on. Don’t panic because you solution is here. We have in stock all Infinix android smart phone rom and scatter files.

Caution:  Flashing MTK with wrong rom/file can brick your phone further. If you correct it here otherwise re-flash with correct ROM. We advised to charge your battery to about 80% before you flash.

Infinix X556 Hot 4 specification


We have to bring the specification to you to ensure the smart android phone you are working.

Infinix X556 Stock ROM


X556-G371-A1-M160906V70

Download infinix X556

How to flash or unbrick Tecno P5

  1. Install the MTK drivers to your computer.

  2. Use Miracle flashing Box or SP Tool.

  3. Download the Infinix X556 firmware.

  4. Extract the downloaded rom and locate scatter file.

  5. If you want to use Miracle Box.

  6. Open the Miracle Box interface and select MTK option.

  7. Select the write option.

  8. Click the Browse folder and open the downloaded rom.

  9. Locate scatter the scatter file and click on it.

  10. Plug your Infinix X556 without battery

  11. Install mtk drivers when it popup.

  12. Click Start on Miracle interface and put your battery.

  13. Wait for Infinix X556 to finish flashing.

  14. If you want to use SP tool check the here.

How to setup your android smart phone.

If your Infinix X556 continues to restarts then do manual hard reset. Setup the phone following the screen instructions. Ensure that you skip connect to wireless.

When you setup the phone, then dial *#06# on the keypad to check imei. Also check the baseband.

If the android shows invalid or null imei then use this method and repair it. You can also use MTK engineering to repair the imei.

Infinix Zero 2 X509 rom or flash file downloads

infinix X509 Zero 2


Do you have a Infinix Zero 2 X509 android phone that bricked or can’t power on. Don’t panic because you solution is here. We have in stock all Infinix android smart phone rom and scatter files.


Caution:  Flashing MTK with wrong rom/file can brick your phone further. If you correct it here otherwise re-flash with correct ROM. We advised to charge your battery to about 80% before you flash.

Infinix Zero 2 X509 specification


We have to bring the specification to you to ensure the smart android phone you are working.

Infinix Zero 2 X509 stock rom

Android 4.4 kitkat

16+2 and 32+2

X509-J5800-KK_20150804

Download

Infinix Zero 2 X509 stock rom

Android 5.1 lollipop

X509-J5800-L-20151025

Download

      
XUI

X509-J5800-L-20160317

Download


Infinix Zero 2 X509 LTE 16+3 ROM

X509-J5800-L-20150819

Download

        
 XUI

Infinix Zero 2 X509 rom

X509-J5800-L-20160319

Download


How to flash or unbrick Infinix Zero 2 X509

  1. Install the MTK drivers to your computer.

  2. Use Miracle flashing Box or SP Tool.

  3. Download the Infinix Zero 2 X509 firmware.

  4. Extract the downloaded rom and locate scatter file.

  5. If you want to use Miracle Box.

  6. Open the Miracle Box interface and select MTK option.

  7. Select the write option.

  8. Click the Browse folder and open the downloaded rom.

  9. Locate scatter the scatter file and click on it.

  10. Plug your Infinix Zero 2 X509 without battery

  11. Install mtk drivers when it popup.

  12. Click Start on Miracle interface and put your battery.

  13. Wait for Infinix Zero 2 X509 to finish flashing.

  14. If you want to use SP tool check the here.

How to setup your android smart phone.

If your Infinix Zero 2 X509 continues to restarts then do manual hard reset. Setup the phone following the screen instructions. Ensure that you skip connect to wireless.

When you setup the phone, then dial *#06# on the keypad to check imei. Also check the baseband.

If the android shows invalid or null imei then use this method and repair it. You can also use MTK engineering to repair the imei.

Infinix 507 rom or flash file downloads

Infinix 507 rom or flash file downloads (All versions)


Do you have a Infinix 507 android phone that bricked or can’t power on. Don’t panic because you solution is here. We have in stock all Infinix 507  android smart phone rom and scatter files.

Infinix 507

infinix X507



Caution:  Flashing MTK with wrong rom/file can brick your phone further. If you correct it here otherwise re-flash with correct ROM. We advised to charge your battery to about 80% before you flash.

Infinix 507 specification


We have to bring the specification to you to ensure the smart android phone you are working.

Infinix 507 stock rom

Android 4.4 kitkat

X507 D5120 20141229

Download

X507 D5120 20150728

Download



Infinix 507  lollipop 5.1 rom

X507 D5120 L 20150923

Download


How to flash or unbrick Infinix 507



  1. Install the MTK drivers to your computer.

  2. Use Miracle flashing Box or SP Tool.

  3. Download the Infinix 507 firmware.

  4. Extract the downloaded rom and locate scatter file.

  5. If you want to use Miracle Box.

  6. Open the Miracle Box interface and select MTK option.

  7. Select the write option.

  8. Click the Browse folder and open the downloaded rom.

  9. Locate scatter the scatter file and click on it.

  10. Plug your Infinix 507 without battery

  11. Install mtk drivers when it popup.

  12. Click Start on Miracle interface and put your battery.

  13. Wait for Infinix 507 to finish flashing.

  14. If you want to use SP tool check the here.


How to setup your android smart phone.


If your Infinix 507 continues to restarts then do manual hard reset. Setup the phone following the screen instructions. Ensure that you skip connect to wireless.

When you setup the phone, then dial *#06# on the keypad to check imei. Also check the baseband.

If the android shows invalid or null imei then use this method and repair it. You can also use MTK engineering to repair the imei.

Infinix Zero 506 rom or flash file

infinix X506



Do you have a Infinix Zero 506 android phone that bricked or can’t power on. Don’t panic because you solution is here. We have in stock all infinix android smart phone rom and scatter files.


Caution:  Flashing MTK with wrong rom/file can brick your phone further. If you correct it here otherwise re-flash with correct ROM. We advised to charge your battery to about 80% before you flash.

Infinix Zero 506 specification


We have to bring the specification to you to ensure the smart android phone you are working.

Infinix Zero 506 Lollipop


X506 J608 L 20151019

Download

Infinix Zero 506 16GB Stock rom

X508 J608 16GB 20150408

Download

Infinix Zero 506 16GB Stock rom


X508 J609 16GB 20141111

Download


How to flash or unbrick Infinix Zero 506

  1. Install the MTK drivers to your computer.

  2. Use Miracle flashing Box or SP Tool.

  3. Download the Infinix Zero 506 firmware.

  4. Extract the downloaded rom and locate scatter file.

  5. If you want to use Miracle Box.

  6. Open the Miracle Box interface and select MTK option.

  7. Select the write option.

  8. Click the Browse folder and open the downloaded rom.

  9. Locate scatter the scatter file and click on it.

  10. Plug your Infinix Zero 506 without battery

  11. Install mtk drivers when it popup.

  12. Click Start on Miracle interface and put your battery.

  13. Wait for Infinix Zero 506 to finish flashing.

  14. If you want to use SP tool check the here.

How to setup your android smart phone.

If your Infinix Zero 506 continues to restarts then do manual hard reset. Setup the phone following the screen instructions. Ensure that you skip connect to wireless.

When you setup the phone, then dial *#06# on the keypad to check imei. Also check the baseband.

If the android shows invalid or null imei then use this method and repair it. You can also use MTK engineering to repair the imei.

Wednesday, 6 September 2017

How to Reset MBO X9 android

How to Hard Reset MBO X9 android.


More often we come to across android hanging. If Android not responding. If android has application that you can’t delete. Or mistake you forget your pattern or password. If your android touch can’t allow you enter password. You can perform hard reset. Get how to reset Gicent Halo android smart phone.

MBO X9

Step 1: Android MBO X9 hard reset

  • Charge your android battery up till 80%.

  • Power off the android smart phone and keep it for some seconds.

If the battery is removable you can remove it and keep

  • Press and hold volume down and power button together.

  • When android sign appears press volume up or home button (this is optional)

  • When you enter fastboot mode.

  • Use volume up or Volume down to select.

  • Press power to choose.


MBO X9 Hard Reset

Step 2: Android MBO X9 Soft Reset

  1. Turn on MBO X9  if it is not on.

  2. Make sure you have enough battery to complete this operation on the phone.

  3. Go to menu: Setting > Backup and reset > Factory Data Reset > Reset Device

  4. Choose Erase Everything.

  5. Enter your pattern or password if you have any.

At this stage the MBO X9 that has been factory reset can take up till 20 minutes for the first boot. After that the phone will start booting normally. Now, wait patiently until your MBO X9 reboots and reset to its factory default settings.

You succeed in doing this phone hard reset then you must configure the phone as if is new one.

6 steps to configure or setup new Android device

How to configure android phones


You just got a new android device or reset your old android device. The next thing you do is to configure or setup the android. You don't know what to do. Well you need some steps to take to avoid mistake. You might know some but this will help you further.

1. Log in to your Google Account


Before you use your android you suppose create or sign in your google account. Although you can skip this steps but mind you one day you will come back to it. Your android device must be connected to internet or your simcard must be internet ready.

By signing in to your Google Account your data will be automatically transferred from your old Android devices.

2. Set up screen lock

You're already logged into your Google account but this is not enough because you still need to add you security type. Here, you can use pattern, pin or swipe. But pin is preferable. Ensure that you don't use easy or common PIN.
You can also use your face recognition. Whatever means that you like most.

3. Install the Google applications

If you device didn't come with other google applications listed below is time to install them. In one way or the other you will find them interesting.
Google Halo (chat message)
Chrome (browser)
Maps (maps and GPS)
Drive (documents)
Hangouts (chat and messages)
Google+
Youtube should be there too. Unless the device came with it.

4. Activate phone tracking

When we discused on how you can find your lost android phone. We showed you how to activate android tracker. So this is important and should not be overlooked. This is an official Google tool which allows you to find your phone in case of theft or simply misplacing it.
In case of theft or loss of your android phone or tablet you can begin to alert an alarm or remotely delete all data.

5. Install alternative Google play stores

Google Play is popular but it may not give you all you want on web. Just like apple jailbreak we have other android application that can give you what google play store will not. So if your mind is just Google play think again because apart from google play store we have the followings:-
Softonic Moba,
Amazon Appstore,
F-Droid
When you are using these applications watch out for virus.

6. Control your device

Controlling your device is one of the priority. But the most important here is antivirus. As we surf net everytime so also we surf and pick virus. So activating antivirus and these other security applications will help your device.
Onavo allows you to control the transfer of the Internet data.
3G Watchdog even more detailed than Onavo also available as a widget
AutoKiller automatically closes inactive applications for saving CPU and battery
Juice Defender helps saving energy.

Check transfer music from iPhone to android.

Tuesday, 5 September 2017

Tecno H7 rom or flash file downloads (All versions)

Tecno H7


Do you have a Tecno H7 android phone that bricked or can’t power on. Don’t panic because you solution is here. We have in stock all Tecno android smart phone rom and scatter files.

Caution:  Flashing MTK with wrong rom/file can brick your phone further. If you correct it here otherwise re-flash with correct ROM. We advised to charge your battery to about 80% before you flash.

Tecno H7 specification

We have to bring the specification to you to ensure the smart android phone you are working.

Tecno H7 stock rom

H7 QP16 150226

Download

H7 QP16 140210

Download

H7 QP16 140710

Download



Tecno H7S ROM

H7S LTE MQ16 141104

Download



Tecno H7 Plus rom

H7 Plus QP16

Download


How to flash or unbrick Tecno H7

  1. Install the MTK drivers to your computer.

  2. Use Miracle flashing Box or SP Tool.

  3. Download the Tecno H7 firmware.

  4. Extract the downloaded rom and locate scatter file.

  5. If you want to use Miracle Box.

  6. Open the Miracle Box interface and select MTK option.

  7. Select the write option.

  8. Click the Browse folder and open the downloaded rom.

  9. Locate scatter the scatter file and click on it.

  10. Plug your Tecno H7 without battery

  11. Install mtk drivers when it popup.

  12. Click Start on Miracle interface and put your battery.

  13. Wait for Tecno H7 to finish flashing.

  14. If you want to use SP tool check the here.


How to setup your android smart phone.


If your Tecno H7 continues to restarts then do manual hard reset. Setup the phone following the screen instructions. Ensure that you skip connect to wireless.

When you setup the phone, then dial *#06# on the keypad to check imei. Also check the baseband.

If the android shows invalid or null imei then use this method and repair it. You can also use MTK engineering to repair the imei.

Tecno P5 rom or flash file downloads (All versions)

Tecno P5



Do you have a Tecno P5 android phone that bricked or can’t power on. Don’t panic because you solution is here. We have in stock all Tecno android smart phone rom and scatter files.

Tecno P5 rom or flash file downloads (All versions)


Caution:  Flashing MTK with wrong rom/file can brick your phone further. If you correct it here otherwise re-flash with correct ROM. We advised to charge your battery to about 80% before you flash.

Tecno P5 specification


We have to bring the specification to you to ensure the smart android phone you are working.

Tecno P5 Old version

Download



Tecno P5 New 4.2 version

Download

P5 0255 D 20141115

 Download



Tecno P5 Plus rom

P5 Plus 0255 kk 20141011

Download

Tecno P5S rom

P5S G255 20130816

Download


How to flash or unbrick Tecno P5

  1. Install the MTK drivers to your computer.

  2. Use Miracle flashing Box or SP Tool.

  3. Download the Tecno P5 firmware.

  4. Extract the downloaded rom and locate scatter file.

  5. If you want to use Miracle Box.

  6. Open the Miracle Box interface and select MTK option.

  7. Select the write option.

  8. Click the Browse folder and open the downloaded rom.

  9. Locate scatter the scatter file and click on it.

  10. Plug your Tecno P5 without battery

  11. Install mtk drivers when it popup.

  12. Click Start on Miracle interface and put your battery.

  13. Wait for Tecno P5 to finish flashing.

  14. If you want to use SP tool check the here.

How to setup your android smart phone.

If your Tecno P5 continues to restarts then do manual hard reset. Setup the phone following the screen instructions. Ensure that you skip connect to wireless.

When you setup the phone, then dial *#06# on the keypad to check imei. Also check the baseband.

If the android shows invalid or null imei then use this method and repair it. You can also use MTK engineering to repair the imei.