Get our Updates

Thursday, 31 August 2017

How to remove Tecno i3 frp or google account

There are other method you can bypass Tecno i3 frp, here you can use this easy method.


There are many methods you can remove Tecno i3 frp but here we bring two methods for you that are common.

1. Use Volcano box to remove Tecno i3 frp


                                   Tecno i3 frp bypass


1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 42 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6737
BB_CPU_NME : [MediaTek] MT6737M|MT6737_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x05000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : LOCKED with CERT

You can check Tecno C8 camon hanging solution here


Tecno i3


2. Use NCK Box to reset Tecno i3 frp


Exe version: Avengers Box MTK 0.4.1
Selected model: MT6571_EMMC
Action: Reset FRP
Will be used loader: DA_PL.bin
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM43)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6735M_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01

----------------------------------------------------
EMMC: (116Gb+16384Mb) SAMSUNG 0x514531334d42
EMMC FW VERSION: 0d:00:00:00:00:00:00:00
EMMC CID: 15010051453133 : 000000000000000000
EMMC UA SIZE: 0x3a3e00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000 [14.572 GB]
Preloader SEC version: 2
Checking data, wait...

Erasing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
All done.


If you follow the instructions  then is time to setup your Tecno i3. Remember you must add password or pin while setup.

Remove or Reset android password without lost of data

How to remove or Reset android password or code or pattern without lost of data


Many people keep asking this particular question "how can I reset android code without lost of data". We have taken our time to attend to this question.

Here, we tested android phones with Volcano box. You can test with other phone flashing box. 

There are two method here:-

  1. Read the android information

Remove or Reset android code without lost of data


2. Read the pattern or code  partition.

Remove or Reset android code without lost of data


USB Backup Facotry Files(FULL)
08:50:38
08:50:38 Operation:
1. Power off the phone.
2. Please insert USB cable within 40 seconds.
08:50:38
08:50:44 MediaTek PreLoader USB VCOM (Android) (COM101)
08:50:44
08:50:45 Connecting...
08:50:45 CPU TYPE:MT6580
08:50:45 Hardware version:CA00
08:50:45 Software version:0000
08:50:45 SecCfgVal :0x00000000
08:50:45 BromVersion :0xFF
08:50:45 BLVersion :0x01
08:50:47 Boot downloading...
08:50:49 EMMC_ID:0x110100303034474530009447F46B9375
08:50:49 EMMC_PRODUCT_NAME: 0x303034474530
08:50:49 EMMC_BOOT1_SIZE: 0x00200000
08:50:49 EMMC_BOOT2_SIZE: 0x00200000
08:50:49 EMMC_PRMB_SIZE: 0x00080000
08:50:49 EMMC_GP1_SIZE: 0x00000000
08:50:49 EMMC_GP2_SIZE: 0x00000000
08:50:49 EMMC_GP3_SIZE: 0x00000000
08:50:49 EMMC_GP4_SIZE: 0x00000000
08:50:49 EMMC_USER_SIZE: 0x0EC000000(3.69 G)

08:50:49 INT RAM: 128KB SDRAM EXT RAM: 512MB DRAM
08:50:49 Finding partition.
08:50:51 MTKxCPU: MT6580
08:50:51 ProdName: 4034D
08:50:51 ProdModel: 4034D
08:50:51 Device: Pixi4-4
08:50:51 AndroidVer: 6.0
08:50:51 Brand: TCL
08:50:51 MTKxPRJ: alps-mp-m0.mp1-V2.34_jhz6580.weg.m_P38
08:50:51 DisplayID: Marshmallow
08:50:51 BoardID:
08:50:51 BuildDate: Wed Aug 31 16:03:56 CST 2016
08:50:51
08:50:51 Usb backup(full) may take more than 30 mins.
08:50:51
08:50:52 Reading pgpt .
08:50:52 Reading proinfo .
08:50:53 Reading nvram.bin .
08:50:54 Reading protect1 .
08:50:56 Reading protect2 .
08:50:58 Reading para .
08:50:58 Reading lk.bin .
08:50:59 Reading logo.bin .
08:51:01 Reading boot.img .
08:51:03 Reading recovery.img .
08:51:06 Reading oemkeystore .
08:51:08 Reading secro.img .
08:51:09 Reading keystore .
08:51:11 Reading seccfg.bin .
08:51:12 Reading expdb.bin .
08:51:15 Reading mobile_info .
08:51:16 Reading frp .
08:51:18 Reading nvdata.bin .
08:51:24 Reading metadata .
08:51:29 Reading system.img .
08:54:36 Reading otp .
08:54:44 Reading userdata.img .
08:54:45 Reading cache.img .
08:54:45
08:54:45 Android_Info.txt create success.
08:54:45 File save path:C:\\MT6580_4034D_Pixi4-4_6.0_TCL_alps-mp-m0.mp1-V2.34_jhz6580.weg.m_P38_2017-08-30 11_20_51\
08:54:45 Elapsed time: 00:04:07.



Like Nokia password remove without flashing use the code and open your phone normally.

Tuesday, 29 August 2017

All china phones new power solution

This is most of china phones power solution


China phone power solution



What you need to fix All China phone new power solution

  1. A good working common sense very important.

  2. A complete set of phone screw drivers.

  3. Working digital or analogue meter.

  4. A rework station in case you want replace an ic.

  5. A sharp blade to scratch the point you want to solder.

  6. A good working soldering iron and soldering paste.

  7. Connecting wires or use old handsfree wires.

  8. A little technical skill.

How to fix All China phone new power solution
  1. Loose or disassemble the How to remove Nokia earpiece mode.

  2. Carefully remove the  china cover.

  3. Use cleaning fluid to clean the China phone.

  4. Scrap the points according to the picture.

  5. Use your connecting wire to short or join the points together.

  6. Ensure that your soldering iron is hot and has a good tip.

  7. Test the continuity with meter of the point you just join together.


This solutions may help you

Nokia 108 earpiece or handsfree mode

Nokia 1202 and nokia 5030 light solution without ic.

Nokia 105, 1280, 100 *0# solution

Nokia 130 menu button solution

Nokia 206 fake or self charging

Nokia Lumia 630 mic/ mouth piece solution


Test the China phone new power solution phone before you tight or assemble the phone back.

Nokia 225 * 0 # keypads solution

Nokia 225 * 0 # keypads not working solution

Nokia 225 keypad solution


What you need to fix Nokia 225 * 0 # keypads not working

  1. A good working common sense very important.

  2. A complete set of phone screw drivers.

  3. Working digital or analogue meter.

  4. A rework station in case you want replace an ic.

  5. A sharp blade to scratch the point you want to solder.

  6. A good working soldering iron and soldering paste.

  7. Connecting wires or use old handsfree wires.

  8. A little technical skill.

This solutions may help you

Nokia 108 earpiece or handsfree mode

Nokia 1202 and nokia 5030 light solution without ic.

Nokia 105, 1280, 100 *0# solution

Nokia 130 menu button solution

Nokia 206 fake or self charging

Nokia Lumia 630 mic/ mouth piece solution


How to fix How to Nokia 225 * 0 # keypads

  1. Loose or disassemble the How to remove Nokia earpiece mode.

  2. Carefully remove the  Nokia 225 back cover.

  3. Use cleaning fluid to clean the Nokia 225 * 0 # keypads solution.

  4. Scrap the points according to the picture.

  5. Use your connecting wire to short or join the points together.

  6. Ensure that your soldering iron is hot and has a good tip.

  7. Test the continuity with meter of the point you just join together.

Test the Nokia 225 * 0 # keypads problem phone before you tight or assemble the phone back.

How to remove Nokia 220 & 225 earpiece mode

How to remove Nokia 220 & 225 earpiece  or handsfree mode

How to remove Nokia 220 & 225 earpiece mode


What you need to remove Nokia earpiece mode

  1. A good working common sense very important.

  2. A complete set of phone screw drivers.

  3. Working digital or analogue meter.

  4. A rework station in case you want replace an ic.

  5. A sharp blade to scratch the point you want to solder.

  6. A good working soldering iron and soldering paste.

  7. Connecting wires or use old handsfree wires.

  8. A little technical skill.

This solutions may help you

Nokia 1202 and nokia 5030 light solution without ic.

Nokia 105, 1280, 100 *0# solution

Nokia 130 menu button solution

Nokia 206 fake or self charging

Nokia Lumia 630 mic/ mouth piece solution


How to fix Nokia 220 & 225 earpiece mode

  1. Loose or disassemble the How to remove Nokia earpiece mode.

  2. Carefully remove the  Nokia 220 back cover.

  3. Use cleaning fluid to clean the Nokia earpiece mode panel.

  4. Scrap the points according to the picture.

  5. Use your connecting wire to short or join the points together.

  6. Ensure that your soldering iron is hot and has a good tip.

  7. Test the continuity with meter of the point you just join together.

Test the Nokia earpiece mode phone before you tight or assemble the phone back.

Saturday, 26 August 2017

How to bypass Huawei android 5.0 and above frp or google account

How to bypass, remove or reset Huawei  android 5.0 & above frp or google account.


Welcome once again to this site. We are very close to you always. Make things the way you don’t expect so easy and very easy.

Without taken much of your time, let’s go to the solution proper. Believing that everybody is aware of what FRP means. Most of androids come with different security patch like 2015 security patch, samsung 2016 security patch and 2017 security patch.

For android lower version like 4.4 and below, you can easily remove the frp(google account) with hard reset or box like Miracle box o volcano box. But for 5.0 and above version frp is not easy to bypass.

Huawei LUA-L01 frp bypass.

  1. Connect the phone to WIFI network.

  2. Wait for the phone to show enter Google account.

  3. Press the place where to enter google account.

  4. Press spacebar button and select more language.

How to bypass Huawei android 5.0 frp



Select download more languages.

Press and hold Swipe images as show in picture below

How to bypass Huawei android 5.0 frp



At right top corner, select search button.

This will take you to google search.

Then you can download this file Android Google 5.1 and quickshortmaker here

Still on google search type “filemanager”

Locate the downloaded file and install the two files.

Open quickshortmaker type google ma in search

Select Google account manager manager and choose this

How to bypass Huawei android 5.0 frp


How to bypass Huawei android 5.0 frp



Sign in with your existing google account or create new one.

Restart your Huawei LUA-L01 android 5.1 version and you will notice that the google sign in has disappeared.

How to bypass Huawei android 5.0 frp




You are free to ask questions.

Check Huawei hard android reset here

How to fix Nokia Lumia hanging blue face with smiley

How to fix Nokia Lumia hanging blue face with smiley like Lumia 530 rm-1017


We have dealt with many problems Nokia Lumia are having, ranging from mic problem of Nokia Lumia, Nokia Lumia Hard reset to change of language in Nokia Lumia.

Today we will be giving you another solution to a common problem of Nokia Lumia. Have you ever power your Nokia Lumia only to be greeted with a sad blue face, which is weird. Some people will doubt the possibility of this.

How to fix Nokia Lumia hanging blue face with smiley



How to fix Nokia Lumia hanging blue face with smiley

As far as a phone is concerned nothing is impossible like battery too hot or too low. So when you see your Nokia Lumia with blue lcd or screen and sad smiley sign don’t panic just follow this instructions below.

You can watch the video here Nokia Lumia blue screen solution 

We use Nokia Lumia 530 rm-1017 to show example. This problem is common to other Nokia Lumia smart phones.

  1. Charge phone battery to 80%.

  2. Remove the battery from the Nokia Lumia 530 smart phone for some seconds.

  3. Insert the battery back gently not if you insert the battery quickly the phone will power itself automatically.

  4. Press power button and Volume down button at same time.

  5. When exclamation mark appears release both buttons.

  6. Press these buttons in sequence order

                       Press volume up

                       Press volume down

                       Press power power

                      And press volume down



Once two gears signs appear allow the phone to perform automatic hard reset. After the hard reset your phone will be back and working again.

Nokia Lumia smiley solution



We will like to hear from you. Like us on facebook and use our comments box.

Glo Nigerian free browsing cheats

How to get Glo network free browsing T&C applied

Glo free browsing


Most of the time, some people are always waiting to hear the word “free”. Well there are many ways you get free browsing from a network provider without thousand of settings and configurations.

At this site zamdtek.com we try to keep you updated with latest technology. We help you do those things that seem impossible by you all by yourself.

Many people in Nigerian ask and keep on asking how do  I get free browsing from this or that network.

Below is the trick you can use to get Glo free browsing.


  1. Get a Glo simcard.

  2. Migrate to Glo bumpa package by dialing *100*10*1#

  3. Press 1 to confirm the package.

  4. Get your 250% bonus.

  5. Use the main money and subscribe.

  6. Assuming you loaded #1000 then subscribes #1000 data plan.

  7. After subscription you have 0.00k in your account as airtime.

  8. Don’t worry your 250% bonus money is there.

  9. You can use this bonus to call any network in Nigeria like MTN, Airtel etc.

  10. You can also use this bonus to send SMS to any network.

  11. Once more you can make international call with this bonus- try this at your own risk.

  12. To get bonus in your data plan assuming you subscribe #1000

  13. Before your data expires load #1000 or subscribe before 3 days your current plan expires.

This is legal and we promise you will enjoy. Many people have been using this plan for more than 2 years now. As you have know why not try it now. This is a win-win situation where you load #1k get #2.5k, use #2.5k to call or sms any network. Use #1k to subscribe. And you have a chance for Glo music invitation.

Please this website is not associated with Glo network. This is not a promo but away to help you out!

You may like these news

Flexible smart phone that you can use.

Phone battery that can last for 400 years.


Feel free to reach like our facebook page or send us email seeaus@gmail.com.

Saturday, 19 August 2017

numa ruck5 android scatter file

Download .bin or stock file of numa ruck5 android.

 numa ruckr5 android scatter file



numa ruckr5 android Specifications


Description 5.0" ruckR5
Platform: MTK 6582 Android 4.4
CPU: 1.3 GHZ Quad Core
Multi-Touch Screen: 5.0" QHD IPS G-F (960*540)
Frequency Voice: GSM: Quad Band 800/900/1800/1900Mhz
Frequency Data: WCDMA: 850/2100Mhz
Sim Card: Dual Sim Dual Standby
Internal Memory/Storage: 4GB(ROM)+1GB(RAM)
External Memory: Support T-F Card (Max to 32GB)
Bluetooth: BT 4.0 LE
FM Radio: Support
Camera: Front real 2MP, Rear 5.0MP AF with Flash
GPRS/WAP/MMS: Support
WIFI: Support (802.11 b/g/n)
GPS: Support
Sensor: Light Sensor, G-Sensor, Proximity Sensor, Magnetic Sensor
Battery: Real 1900mAh/LiPolymer
Speaker: 20*30 Box Speaker
OTG: Included (Playing music 7 video from external hard drive 128GB maximum)


Reading of numa ruckr5 android from Volcano box


Analysis of USB port,Please insert phone USB cable.
Connecting...
CPU TYPE:MT6582
Hardware version:CA01
Software version:0001
SecCfgVal :0x00000000
BromVersion :0xFF
BLVersion :0x01
Boot downloading complete!
EMMC_ID:0x70010056313030303806F7656EBD32A9
EMMC_PRODUCT_NAME: SAMSUNG :0x563130303038
EMMC_BOOT1_SIZE: 0x00400000
EMMC_BOOT2_SIZE: 0x00400000
EMMC_PRMB_SIZE: 0x00400000
EMMC_GP1_SIZE: 0x00000000
EMMC_GP2_SIZE: 0x00000000
EMMC_GP3_SIZE: 0x00000000
EMMC_GP4_SIZE: 0x00000000
EMMC_USER_SIZE: 0x1C3000000(7.05 G)

Analysis of system files...
PRELOADER: addr:0x000000 --length:0xC00000
MBR: addr:0xC00000 --length:0x080000
EBR1: addr:0xC80000 --length:0x080000
PRO_INFO: addr:0xD00000 --length:0x300000
NVRAM: addr:0x1000000 --length:0x500000
PROTECT_F: addr:0x1500000 --length:0xA00000
PROTECT_S: addr:0x1F00000 --length:0xA00000
SECCFG: addr:0x2900000 --length:0x020000
UBOOT: addr:0x2920000 --length:0x060000
BOOTIMG: addr:0x2980000 --length:0x1000000
RECOVERY: addr:0x3980000 --length:0x1000000
SEC_RO: addr:0x4980000 --length:0x600000
MISC: addr:0x4F80000 --length:0x080000
LOGO: addr:0x5000000 --length:0x300000
EXPDB: addr:0x5300000 --length:0xA00000
ANDROID: addr:0x5D00000 --length:0x38400000
CACHE: addr:0x3E100000 --length:0x7E00000
USRDATA: addr:0x45F00000 --length:0x7C800000
BMTPOOL: addr:0xFFFF00A8 --length:0x1500000

Read phone information success.
Format range: Start Address: 0x45F01000,Format Length :0x7C7FF000
Flash erasing complete!
Check the data complete.



numa ruckr5 android scatter file download here

Stay glued to our site as we dish out unbeatable best solutions!

Friday, 18 August 2017

How to repair Nokia 105 local mode

We bring to you the best way to fix Nokia 105 local mode.


You just powered your Nokia 105 and it shows local mode. So what is the next thing you should do. Loose the phone and check for water damage.

Clean your panel for any dust on liquid. On your phone, if it continues then follow below solution.

Two Method to fix Nokia 105 local mode

First Method
Loose or  disassemble the phone. carefully remove the components on the picture below.


Nokia 105 local mode solution
















Power the phone, if the local mode continues the proceed to the second method.

second Method

Use ATB flashing Box or Cyclone Box or Infinity Best with RM-908 version v3.60 and flash the phone.






Nokia 105 local mode solution

Booting Phone...
CPU ID Response: A200341100
CPU Type: XG110 2.1B
Phone Booted after 2 attempts...
******************************************************
TIME STARTS HERE
******************************************************
Sending PBL 19456 bytes...
PBL Successfully Sent...
Sending SBL 65024 bytes...
SBL Successfully Sent...
Flash Chip Manufacturer ID: 0x00EF
Flash Chip Type: 64 Mbit (4Mb x 16) NOR
Extended Information: Multi-Bank / 1.8v
Processing Image File: C:\Users\ZD Tech\Downloads\rm-908-3.60\rm908_03.600

Data Block Found...
Number of Sections: 03
IMAGE Certificate Block Sent Successfully...
Processing Section 01 of 03
IMAGE Erase Block: 0x00800000~0x00A0FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 2162688 bytes
Data Checksum: 0551
Uploading Data Blocks to phone...
IMAGE Data Blocks uploaded to phone...
Processing Section 02 of 03
IMAGE Erase Block: 0x00C60000~0x00EAFFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 2232896 bytes
Data Checksum: 89F6
Uploading Data Blocks to phone...
IMAGE Data Blocks uploaded to phone...
Processing Section 03 of 03
IMAGE Erase Block: 0x00FFC000~0x00FFFFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 64 bytes
Data Checksum: 0000
Uploading Data Blocks to phone...
IMAGE Data Blocks uploaded to phone...
Start Data Verification... (Please wait)
Data Verification Successful...


Processing Image File: C:\Users\ZD Tech\Downloads\rm-908-3.60\rm908_03.60ij
Data Block Found...
Number of Sections: 01
IMAGE Certificate Block Sent Successfully...
Processing Section 01 of 01
IMAGE Erase Block: 0x00210000~0x0039A33E
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 1614656 bytes
Data Checksum: 6B15
Uploading Data Blocks to phone...
IMAGE Data Blocks uploaded to phone...
Start Data Verification... (Please wait)
Data Verification Successful...
Processing Image File: C:\Users\ZD Tech\Downloads\rm-908-3.60\rm908_nai03.60ij

Data Block Found...
Number of Sections: 01
IMAGE Certificate Block Sent Successfully...
Processing Section 01 of 01
IMAGE Erase Block: 0x00EB0000~0x00F161BE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 418240 bytes
Data Checksum: 7E6F
Uploading Data Blocks to phone...
IMAGE Data Blocks uploaded to phone...
Start Data Verification... (Please wait)
Data Verification Successful...
Exit Flash Mode Done...
Time Elapse : 00:01:55

Check other Nokia solutions here

Nokia 1202 and nokia 5030 light solution without ic.

Nokia 105, 1280, 100 *0# solution

Nokia 130 menu button solution

Nokia 206 fake or self charging

Nokia Lumia 630 mic/ mouth piece solution


How to fix Nokia Nokia 110 112 lcd/screen and keypad light solution.

alas your phone is back to life.

Blackberry Passport hanging or freeze solution

How to fix Blackberry Passport hanging or freeze and not responding.

Blackberry passport hanging solution


As day pass-by so is many phones keep developing one fault or the other. But we keep on trying to keep with this pace of different phone problems. 

Smart phone no matter how expensive can develop any problem any time. Don't say oh this is a cheap phone that is why this is happening. No even expensive smart phone can. Just be more care fore the way you handle your phone.

What to do when you phone drops in water. Don't forget on how you can keep you Blackberry 10 series (BB10) whatsapp working here.

How to fix Blackberry Passport hanging or freeze.


  1. Trying sliding image on screen.

  2. Plug in your charger into the phone.

  3. Check whether is water damaged.

  4. After trying all these, and the phone is still hanging, then use this trick press and hold the power button for about 30 seconds to 1 minute.

  5. Once the red light blinks twice and the Blackberry passport reboot. Then your phone is back to life. Otherwise your touch screen is bad. 


This solution has been tested and working 100% unless your Blackberry passport is water damaged or has touch issues.

We need your feedback if this solution solved your problem. We are happy to help you in a little way we can.

Relaxx R30 android rom

Download Relaxx R30 android stock rom (spd 6820) .bin flash file.

Relaxx R30 stock rom



Android smart phones always come in different shape, size, colour, manufactures and etc. Well just as we advice always that before you flash or unlock any android that is not popular, you should backup the android in question.

If you have this phone that is dead, you can get the rom from us. The rom or firmware is in .bin file. It was backup with Miracle box. Don't forget to backup the one you have before using the the one you downloaded. 

You can download infinix 510 clone or china from here.

Specifications of Relaxx R30 android phone.


Model:  Relaxx R30
Unlocked Smartphone Network Technology
Dimension: 149*72.70*9.1mm
Weight: 132g
SIM: Dual SIM (Micro-SIM, dual stand-by)
Size: 5.0inch
Resolution: 480*854pixels
Platfrom:Spreadtrum 6820
OS: android 5.1
Camera: front2.0+back2.0 Mega Pixels
Memory Card slot: microSD,up to 32 GB
Internal: 512MB+4GB
Frequency: GSM 850/900/1800/1900MHz optional
Albert types: Vibration,MP3,WAV ringtones
Loundspeaker: Yes
3.5mm jack: Yes



Caution: zamdtek is not responsible for any damage done to your Relaxx R30 android. We only provide a solution but cannot ascertain your working environments and conditions. So use it at your own risk.

Relaxx R30 android spd 6820 .bin file from working phone download here

Don't forget to ask before you flash. Register with us to comment. You can reach us through our facebook page or  email directly.

Monday, 14 August 2017

How to flash Blackberry 10 with www.bberror.com/bb10...

How to flash Blackberry Z10, Q10, Priv etc with this error message:

                       www.bberor.com/bbxxxxx


Almost every smartphone has one problem or the other. Ranging from corrupt software, apps, os, nternal system etc to displaying a particular error on LCD.

The emergent of blackberry 10 os known as BB10 has a close edge to normal android phone. These sets of phones that is BB10 can run both blackberry and android apps.

Apart from that the phone:- BB10 comes with some issues that the os can just corrupt. This may be cause by hard reset of virus attack. Whatever way we always here to help you out of the trouble.



BB 10 error display solution


www.bberor.com/bb solution


[/caption]

What to do when you see this information on your BB10 screen.

  1. Download BBlink software or download BB10 drivers of the PC os you are using.

  2. Install the drivers on your PC.

  3. Download autoloader of your BB10 e.g. if your BB10 is Z10 the autoloader must be Z10.

  4. But not only Z10 autoloader unless you are using universal autoloader like Q10-Q5 autoloader.

  5. So you have to open the BB10 battery and check the information below the battery.

  6. Here, you will see something like STL100-1, -2, -3 or SQN100-1,-2,-3. So if your BB10 is STL100-1, the autoloader you will dowbload must be STL100-1 autoloader.

  7. After downloading, save the file on a location you can remember.

  8. Connect your BB10 to PC with USB, wait for drivers to install.

  9. Open your autoloader and grab your paper as you wait for the operation to complete.


You may also like 

How to use whatsapp on BB10.

BB10 that is pure android phone.

How to backup your Blackberry contacts


Tell others about us!

How to transfer files from android to PC without cable

How to transfer files from android to PC without cable.


Today we are going to introduce to you another method which you can connect your android phone to computer without any USB. 

Just as we gave you a solution of android imei repair without pc. We also showed you how you can turn your android into computer. We continue to breakdown those technology that you feel is complex.

If you can remember how to remote your device with your phone through bluetooth. You can also transfer files from your phone to your computer through bluetooth. But this method has disadvantage of time wasted when transferring a large file.

As technology advance we continue to see easier life through technology like introduction of Flashshare and xender. Although Xender can be used to transfer files from android to computer but we a have a powerful and simple app called airMoore

airmore connect android to pc without USB





How to use AirMore

  1. Use google play store and download airmore to your android.

  2. Turn on your android and pc WIFI.

  3. Type web.airmore.com or launch airmore from their website.
 airmore connect android to pc



  • Open AirMore app on your android phone.

  • Press scan to connect on your smart phone.

Select your Android in Radar on the web. A notification window will pop up on your Android, requesting to connect. Click “Accept”.

                                                 AirMore connect android to pc


Transfer Photos

When the two devices are connected, choose “Pictures” icon.
Select an item or  photos you would like to transfer and click “Export”.

Caution: If you select less than three photos, they will be downloaded separately. If you select three or more, they will be compressed into a zip file.


AirMore connect pc to android




Please stay glued because we are just starting.

How to use android phone as Hotspot

How to use android phone as Hotspot or modem.

I still hear people say I want to buy modem for my laptop or my modem is not working. I will be like why are these people still in dark age. 

This is because they carry different types of android which you can turn to pc, iPhone and Nokia Lumia. So why can't you use that your smart phone as your modem and phone at same time.

Always come here to learn anything about technology. Just relax and follow the following instructions on how you can sue your phone as modem called hotspot.

Step 1 Ensure you have enough data on your simcard because pc consumes more data than phone. Go to Menu

Android Hotspot


                               How to find your phone through google account



Step 2 Go to settings

Setup Android Hotspot


Step 3 check that you are in wireless and network option. Select More settings



                           How to use android phone as Hotspot


Step 5 choose Tethering and Portable Hotspot

Android Hotspot


How to use android phone as Hotspot

Step 6 activate Hotspot and configure the setting like username and password. Ensure you use strong password.



How to use android phone as Hotspot


We know that you will like to know these


How to backup your sim card contacts.

Google find your phone.

You can ask any question but make sure you register with us.

Sony Ericsson LT15i, LT18i and S0-01C password solution

Sony Ericsson password problem. These type of android phone make use of code to unlock the password or hard reset.


Just dial this code on the picture below (*#*#7378423#*#*)


                                   
                                    Sony Ericsson LT15i LT18i S0-01C hard reset

Then this will take you to customization reset. But we discovered something that in S0-01c the customization is missing.


Sony Ericsson LT15i LT18i S0-01C hard reset



So to reset this phone that is Sony Ericsson LT15i, LT18i and S0-01C we need to use Setool Flashing box

If you have setool SE flashing box

just held to the support section

download the SE android flash file according to the phone information

like 4.0.1.c.B1.app ...

install the driver

and select flashing.




You are done with flashing.

Then you can now reset your phone by dialing the code above. Choose customization settings and select rest device.


Sony Ericsson LT15i LT18i S0-01C hard reset



You can check this Sony Ericsson Z2a hard reset.

We will like to hear from you. Use our comments section

How to flash LG F240l and E980

What happened to your LG F240l or E980 and it got bricked or stuck on LG Logo. 

Don't worry just follow these easy steps and fix your android LG phone again.

Before you proceed try hard reset first. If rest didn't fix the problem then do the following.

                               LG F240l or E980 flashing


Download these for LG F240l or E980

1. LGFlashTools v1.5.
2. DLL file for LGE980
3. Drivers
4. The stock image file


Install these files for LG F240l or E980

1. Install the LG drivers downloaded above.
2. Install LGFlashTools v1.5 (but don't run it)
3. Extract the DLL and the TOT files from above and put them in a nice tidy directory.

Setup up LG F240l or E980 for flashing

1. Put the phone into download mode. (Turn off device, keep pressing volume down while plugging in the micro usb cable. If this doesn't work, try holding both volume keys instead)
2. Let the phone initialize and install the drivers. Once done, in Device manager, you should see the LG phone listed under COM ports (something along these lines).
3. Find that LG entry in Device Manager, click on Properties, Advanced and then change the COM port to COM178 or the port in your computer and close/save.
4. Unplug your phone! Important step.

LGFlashTools

To get this tool to work, you'll need to do a few tricks.
1. Set the computer's date to some time in July 2012 or before.
2. Disconnect the internet
3. Find a serial number or register key from somewhere on the web (a google search for lgflashtools serial will yield some results).
4. Execute the LGFlashTools. It should ask you for a key, put it in. Now you should see a dialog where you can load the DLL file and the TOT files that you extracted earlier. Put them both in here. Click ok
5. There is a yellow arrow on the top left. Click on it to initialize the process. Once done, it should say "ready/finished" or whatever.
6. Put the phone in download mode again, and plug it into the USB port. LG FLash Tools should start flashing it automatically.

Check   also 

 how to remove password from LG GX200

LG E610 flashing and hard reset


Thanks

Sunday, 13 August 2017

Nokia 110 112 lcd/screen and keypad light solution

How to repair that Nokia 110, Nokia 112 lcd or screen light. Image without light.

Nokia 110 112 lcd/screen and keypad light solution



How to repair Nokia Nokia 110 112 lcd/screen and keypad light solution.

What you need to Nokia 110 112 lcd/screen and keypad light solution.

  1. A good working common sense very important.

  2. A complete set of phone screw drivers.

  3. Working digital or analogue meter.

  4. A rework station in case you want replace an ic.

  5. A sharp blade to scratch the point you want to solder.

  6. A good working soldering iron and soldering paste.

  7. Connecting wires or use old handsfree wires.

  8. A little technical skill.

This solutions may help you

Nokia 1202 and nokia 5030 light solution without ic.

Nokia 105, 1280, 100 *0# solution

Nokia 130 menu button solution

Nokia 206 fake or self charging

Nokia Lumia 630 mic/ mouth piece solution


How to fix Nokia 110 112 lcd/screen and keypad light solution.

  1. Loose or disassemble the Nokia Nokia 110 112 lcd/screen and keypad light solution phone.

  2. Carefully remove the keypad pad.

  3. Use cleaning fluid to clean the Nokia Nokia 110 112 lcd/screen and keypad light solution panel.

  4. Scrap the points according to the picture.

  5. Use your connecting wire to short or join the points together.

  6. Ensure that your soldering iron is hot and has a good tip.

  7. Test the continuity with meter of the point you just join together.

Test the Nokia Nokia 110 112 lcd/screen and keypad light solution phone before you tight or assemble the phone back.

Nokia 1280,103, 105 4728 keypad solution

How to repair Nokia 1280,103, 105 4728 keypads or buttons.

Nokia 1280,103, 105 4728 keypad solution


How to repair Nokia Nokia 1280,103, 105 4728 keypad

What you need to Nokia 1280,103, 105 4728 keypad

  1. A good working common sense very important.

  2. A complete set of phone screw drivers.

  3. Working digital or analogue meter.

  4. A rework station in case you want replace an ic.

  5. A sharp blade to scratch the point you want to solder.

  6. A good working soldering iron and soldering paste.

  7. Connecting wires or use old handsfree wires.

  8. A little technical skill.

How to fix Nokia Nokia 1280,103, 105 4728 keypad

  1. Loose or disassemble the Nokia Nokia 1280,103, 105 4728 keypad phone.

  2. Carefully remove the keypad pad.

  3. Use cleaning fluid to clean the Nokia Nokia 1280,103, 105 4728 keypad Panel.

  4. Scrap the points according to the picture.

  5. Use your connecting wire to short or join the points together.

  6. Ensure that your soldering iron is hot and has a good tip.

  7. Test the continuity with meter of the point you just join together.

Test the Nokia….. phone before you tight or assemble the phone back.

This solutions may help you:

Nokia 1202 and nokia 5030 light solution without ic.

Nokia 105, 1280, 100 *0# solution.

Nokia 130 menu button solution.

Nokia 206 fake or self charging.

Nokia Lumia 630 mic/ mouth piece solution