Search zamdtek

7/15/2017

How to repair Tecno DP8D charging port solution

Do you have a bad Tecno DP8D charging port check here.


Tecno DP8D charging port solution



This type of phone Tecno DP8D has a flex that contain both the the charging port and mic. So when you are fix this particular charging port care should be taken not to  damage the mic that mouth piece.

Steps on how to fix tecno DP8D

loose the Tecno DP8D gentle.

Locate the charging port

Tecno DP8D charging port solution



Plug charger and read the panel port

If you donot have the flex to replace the old one

Then make this jumper

Tecno DP8D charging port solution




problem solved.

Read  How to flash android without charging port



Caution:

Zamdtek is not associated with wireless organizations like Nokia, Samsung, Sony Ericsson, Lg,  Motorola and some other and so forth Makers/Merchants . All trademarks are the property of the particular trademark owners. We simply give outlines to ponder and repairing reason.

Factory Hard reset will set your telephone in original factory settings. It will expel every one of the information and applications that you introduced. Your contacts will be deleted and you need to include them once more.

Stock Firmware we attempt to give the best and most recent glimmer records and firmware, Yet we don’t ensure the exactness or similarity of any of the documents. So utilize them at your own hazard!.

Hardware problems:  the solution we posted here has been tested in our workshop. We don’t take any responsibility whatever if anything go wrong in cause of your own work . We repeat this and loud please do it at your own risk. You can ask us how.

Ask questions!

7 comments:

  1. I have try placing it as you directed but not charging only showing charging on the charger head pls what else should do

    ReplyDelete
  2. @James when you connect the two terminal, -ve to ground and +ve to VBUS.
    Plug the USB
    Test the two terminals with meter either digital or analogue.
    Put the red at VBUS and Black at GND or body.
    The output must be 5V.
    Then the Tecno must charge.

    ReplyDelete
  3. I have don that several times but not working. And if I leave the charger some minutes it will start hearing please what will I do

    ReplyDelete
  4. After that, the screen started showing blue some how if I on it please help me. someone told me that they have worked the adding charge of the phone before. i my just tired I don't know what to do.

    ReplyDelete
    Replies
    1. If the screen shows blue,the problem is from LCD or flex.
      So check your screen

      Delete
    2. I have found the charging flex.
      The problem is that the screen flex clip on the board has a problem which is that the upper teeth clip that is covered with white something have removed like up to four because that white thing braked

      Delete
    3. Pls your contact number so that I can discuss more with you

      Delete

Your comments helps us to improve & others to learn

About Zamdtek

We developed this site as a result of company expansion. We have over 10 years experience on PC and Phone repair. We are committed to help you both online and workshop. Visiting us will give you hope and satisfaction. We have covered almost every problem you may face with your Phone or PC.

Socialize with Zamdtek:- Twitter | Facebook Page | Google Plus| StumbleUpon| TechForum | Linkedin |Youtube channel| Pinterest