Search zamdtek


How to repair Nokia 105 Menu keypad solution

Nokia 105 Menu button/ keypad solution

When the menu button of Nokia 105 is not working is possible that inner button for rust. We have to explain the particular Nokia 105 we talking about here:

Nokia 105 accompanies a 1.40-inch touchscreen show with a determination of 128 pixels by 128 pixels at a PPI of 129 pixels for each inch.

The telephone packs 8MB of inward stockpiling can't be extended. To the extent the cameras are concerned, the Nokia 105 packs a No essential camera on the back

The Nokia 105 runs Symbian and is controlled by a 800mAh removable battery. It quantifies 107.00 x 44.80 x 14.30 (stature x width x thickness) and weighs 70.00 grams.

The Nokia 105 is a solitary SIM (GSM) cell phone that acknowledges a Regular-SIM. Network alternatives incorporate FM.

Steps to repair Nokia 105 menu button

  • Take your lead,

  • Use your connecting wires,

  • Use a hot  soldering iron,

  • The runs the connecting wires as,

  • and just make jumper according to picture.

Nokia 105 keypad menu solution


say thanks


Zamdtek is not associated with wireless organizations like Nokia, Samsung, Sony Ericsson, Lg, Motorola and some other and so forth Makers/Merchants .All trademarks are the property of the particular trademark owners. Zamdtek simply give outlines to ponder and repairing reason.

Hardware problems:  the solution Zamdtek posted here has been tested in our workshop. We don’t take any responsibility whatever if anything go wrong in cause of your own work . We repeat this and loud please do it at your own risk. You can ask us how. Use this guide at your own risk. Zamdtek shall not have any liability or responsibility for whatever happens to you and your device by using the instructions in this guide.

The instructions provided in this tutorial for educational purpose only. There is no guarantee that these steps will work for your device.


  1. Himangsu Kumar DasMarch 05, 2017 6:46 am

    Nokia 105 menu key not working, What can I do for this ??

    please help me to do it

  2. I will get back to you

  3. I didn't get any jumper,is not drawn clearly. put it more brightly, thanks in advance.

  4. Has been updated

  5. Up down and call ok buttons are not working please any salutation

    1. Please heat the phone "light" with rework station.

    2. Then follow the carbon drw on the keypad surface

  6. Replies
    1. When you scratch the point a little, then you can connect collecting wires


Your comments helps us to improve & others to learn

About Zamdtek

We developed this site as a result of company expansion. We have over 10 years experience on PC and Phone repair. We are committed to help you both online and workshop. Visiting us will give you hope and satisfaction. We have covered almost every problem you may face with your Phone or PC.

Socialize with Zamdtek:- Twitter | Facebook Page | Google Plus| StumbleUpon| TechForum | Linkedin |Youtube channel| Pinterest