logo

How to connect china phone to Computer with china phone test point

How to connect china phone to Computer with china phone test point

How to flash smaller china Phones without USB charging port through test point with RJ45 cable.


This may sound strange but that is why we are exceptional and different from others. This is because we combine electronics Knowledge with GSM technology to bring you the best of phone practical repair. This particular solution here is never be heard or done.

Flash a phone without USN charging port working hmm. Just follow the steps bellow.

Step 1 the test point located front and back

China phone test point




Over the years of experience i have discovered that it is

easy to use RJ45 cable to connect china phone to pc

instead of through charging points.

This I called *china phone test point*

just get old UFS or JAF cable cut this way and connect

Step 2 the test point located under the lcd or screen





Step 3 the test point located across the front panel





step 4 the test point located under the battery






and connect here








so whether there is charging port or not you can now flash you china phone,

Use box like GPG Dragon, Avarta, Miracle box, Volcano box etc

Check china Phones power solution

How to make RJ45 for china phone test point

  • Look or buy old JAF Box FBus cable.

  • Gently remove the head of the Jaf Box FBus cable.

  • Open the eight connecting wires..

  • Cut off all the cables expect light-yellow, Green and red.

  • Light-yellow is connected to Tx.

  • Green is connected to GND

  • Red is connected to Rx.

Note

Hardware problems  Zamdtek posted here has been tested in our workshop. We don’t take any responsibility whatever if anything go wrong in cause of your own work . We repeat this and loud please do it at your own risk. You can ask us how. Use this guide at your own risk.

The instructions provided in this tutorial for educational purpose only. There is no guarantee that these steps will work for your device.