New solutions

Thursday, 28 December 2017

Starting a blog as a blooger in 2018

HOW TO BLOG IN 2018


Blog is a google hosted kind of website being controlled by google company. People use blog just like every other social media networks. They use it to air their views, show how creative they are and to circulate information to wider audience.

Unlike wordpress and other website platform, blogger is being regulated by the Google body therefore there are some things you are not expected to use it for.

How to get google adsense approval within two weeks in 2018


You have started blogging, and you have been told that is only google adsense that can support you financially, if you are able to run their ads on your blog.

There are other alternative ads companies but google adsense is more reliable and trusted.

How to get google adsense approved in blog


Ask any blogger he will show a replied message in his inbox before he got adsense approval that starts with:-

Unfortunately …….your application has been rejected……………. 
Reasons

a. Difficult site navigation...

b. Insufficient content ....

c. Unoriginal content ....

d. Site not comply with adsense policy.

And so on 


Rejected google adsense message


What to do after getting disapproval message


This type of message (rejected message) should not be the end of your blogging life rather the begging.

For instance when you get reply about insufficient content, you should add more original content instead of copying other people posts.

How I got mine blog approved with google adsense


When I entered into blogging, I went in because of passion not quick money making. I started blogging because my king of blog is missing in blog atmosphere.

Many people blog about daily news, most of their article being copied and fabricated. I avoided this by being unique with unique contents. All my posts and article are mine:- what we do in workshop and what I sit, think and write.

I believe in myself and my creativity. When I applied for adsense I got rejected because of insufficient contents. I added up to 25 posts. I reapplied and I got rejected again because of insufficient contents. This second insufficient contents is where many people get it wrong. This is not about the number of posts in your blog but individual post content.

A blog post content must be at least 300 or above organized written words. I went back to individual post cross check the words and the sentence organization. I re-organized and complete all the posts, categories, pages, articles, and labels. After that I applied for google adsense and got approval.

approved adsense message



Many people said that without buying domain name your blog won’t be approved:- this is not true.

Others suggested that your theme and design with be excellence before approval. The truth is that your decoration has nothing to do with google adsense approval. 


Connected adsense with site


I have helped others get their adsense approved within short time. You can ask your question.

Monday, 18 December 2017

Infinix Zero 5 X603 hard reset, pattern removal and frp bypass

infinix Zero 5 X555 hard reset

.


Don't panic your in right place!

Your infinix Zero 5 android enter privacy lock, password, pattern or enter gooogle account.

The solution is here. Just follow the instructions 

Step 1

·                     Charge your infinix Zero 5 battery about 80%.

·                     Power off infinix Zero 5 android smart phone

·                     Leave the phone for about 5 minutes

·                     Press and hold Volume Up with Power button simultaneously

·                     If your enter fastboot mode

·                     Use your Volume Up to select factory reset

·                     Use Volume Up also to choose yes reset all

·                     Allow the android to perform the factory finish 

·                     When it returns to reboot, select it and allow it for some time to boot.

·                     If the setup enter google account or frp bypass, then jump to Step 4.

·                     If you get imei null or invalid check here

Step 2

Use Miracle Box you can download the crack from here

We recommend you use Mirecle Box CRACK because it doesn’t require any box and can be saver for android operation more than any other Flashing Box.

Just follow the instruction on android hard reset

Open the box interface, select MTK, select read phone, select format phone.
Step 3

The use of Volcano Box

We recommend this particular Box when dealing with the android Privacy Lock

This Box can safely reset android privacy lock code with the android having issues.

We have tested this particular Flashing Box on many android phones without any problem. The Volcano Box is safe for android privacy code removal.

Note: Privacy code is different from android normal PIN Code as PIN can easily be removed with factory reset or hard reset but privacy code can’t.

Download Tecno Stock ROMs here

Download itel flash files here

Step 4

Google account removal or frp bypass of android 5.0 and above. FRP bypass is just a way you can use to bypass that stage of android boot that requires google account.

When you talk about MTK androids and SPD androids phones this is easy but if it is Samsung android phones, check solution here.

One can use Miracle Box here and follow these instructions.

Use Google manage and QuickShortcutMaker

Use method with  Miracle Crack Box or Volcano box

How to bypass Blackberry Classic 10.3.3 anti theft or ID

How to bypass Passport 10.3.3 anti theft


Did you forget your BlackBerry Passport password?
And average technician knows that when it comes to remove BlackBerry Passport ID or anti theft on any BlackBerry 10.3.3 is not easy unless you use Chimera Tool.

Here, we are going to show you a trick that you can use and do it successfully.
This particular procedure has been tested 100% in our various workshops. But remember we are not responsible for any damage on your your BlackBerry. Do this on your own risk.

Learn how to Flash Blackberry 10 with ...error..

 What you need to remove anti theft on BB 10 10.3.3

  • A good working PC.
  • Charge your battery to about 100%.
  • Find a good USB for the work.
  • Go to blackberry link and download BlackBerry drivers.
  • Install the drivers on your PC
  • Close any other related Blackberry applications running on your PC.
  • If your are steady check the Steps below:

Step 1 
Download this file (autoloader) Q10_10.3.01.2267_SQN100-1-2-3-4-5 work with all slim tech from here or here.
Save the file on a folder you will remember.

Step 2
Go to this website and download your particular BlackBerry phone autoloader file, Lets say BlackBerry Q10 or BlackBerry Z30.
Save the file on a folder you will remember.

Step 3 
If your BlackBerry 10 has a detachable battery, then remove the battery.
And the Black Berry 10 for sometimes without battery.

Note:
The file you downloaded on Step 1 is BlackBerry 10.3.01, so when you flash it on 10.3.3, your BlackBerry 10 will only blink RED LIGHT!

Step 4 
Open the autoloader file you downloaded on Step 1 and plug your blackberry 10.
Allow the autoloader to finish running.
Then remove your BlackBerry 10.3.3 from PC.
The BlackBerry only blinks RED light, don't panic!

You may like this solution How to Bypass FRP on androids

Step 5
Open the autoloader file you downloaded on Step 2 and plug your blackberry 10.
Allow the autoloader to finish running.
Then remove your BlackBerry 10.3.3 from PC
Follow all the process of setup and configure your BlackBerry 10.
This particular process if followed carefully will remove anti theft on any BlackBerry with version 10.3.3.

Alas your BlackBerry is back to life

Sunday, 17 December 2017

How to bypass Blackberry Classic 10.3.3 anti theft or ID

How to bypass Classic 10.3.3 anti theft


Did you forget your BlackBerry Classic password?
And average technician knows that when it comes to remove BlackBerry Classic ID or anti theft on any BlackBerry 10.3.3 is not easy unless you use Chimera Tool.

Here, we are going to show you a trick that you can use and do it successfully.
This particular procedure has been tested 100% in our various workshops. But remember we are not responsible for any damage on your your BlackBerry. Do this on your own risk.

 What you need to remove anti theft on BB 10 10.3.3

  • A good working PC.
  • Charge your battery to about 100%.
  • Find a good USB for the work.
  • Go to blackberry link and download BlackBerry drivers.
  • Install the drivers on your PC
  • Close any other related Blackberry applications running on your PC.
  • If your are steady check the Steps below:


Step 1 
Download this file (autoloader) Q10_10.3.01.2267_SQN100-1-2-3-4-5 work with all slim tech from here or here.
Save the file on a folder you will remember.

Step 2
Go to this website and download your particular BlackBerry phone autoloader file, Lets say BlackBerry Q10 or BlackBerry Z30.
Save the file on a folder you will remember.

Step 3 
If your BlackBerry 10 has a detachable battery, then remove the battery.
And the Black Berry 10 for sometimes without battery.

Note:
The file you downloaded on Step 1 is BlackBerry 10.3.01, so when you flash it on 10.3.3, your BlackBerry 10 will only blink RED LIGHT!

Step 4 
Open the autoloader file you downloaded on Step 1 and plug your blackberry 10.
Allow the autoloader to finish running.
Then remove your BlackBerry 10.3.3 from PC.
The BlackBerry only blinks RED light, don't panic!

You may like this solution How to Bypass FRP on androids

Step 5
Open the autoloader file you downloaded on Step 2 and plug your blackberry 10.
Allow the autoloader to finish running.
Then remove your BlackBerry 10.3.3 from PC
Follow all the process of setup and configure your BlackBerry 10.
This particular process if followed carefully will remove anti theft on any BlackBerry with version 10.3.3.

Alas your BlackBerry is back to life

How to bypass Blackberry Q10 10.3.3 anti theft or ID

How to bypass Q10 10.3.3 anti theft


Did you forget your BlackBerry Q10 password?
And average technician knows that when it comes to remove BlackBerry q10 ID or anti theft on any BlackBerry 10.3.3 is not easy unless you use Chimera Tool.

Here, we are going to show you a trick that you can use and do it successfully.
This particular procedure has been tested 100% in our various workshops. But remember we are not responsible for any damage on your your BlackBerry. Do this on your own risk.

 What you need to remove anti theft on BB 10 10.3.3

  • A good working PC.
  • Charge your battery to about 100%.
  • Find a good USB for the work.
  • Go to blackberry link and download BlackBerry drivers.
  • Install the drivers on your PC
  • Close any other related Blackberry applications running on your PC.
  • If your are steady check the Steps below:


Step 1 
Download this file (autoloader) Q10_10.3.01.2267_SQN100-1-2-3-4-5 work with all slim tech from here or here.
Save the file on a folder you will remember.

Step 2
Go to this website and download your particular BlackBerry phone autoloader file, Lets say BlackBerry Q10 or BlackBerry Z30.
Save the file on a folder you will remember.

Step 3 
If your BlackBerry 10 has a detachable battery, then remove the battery.
And the Black Berry 10 for sometimes without battery.

Note:
The file you downloaded on Step 1 is BlackBerry 10.3.01, so when you flash it on 10.3.3, your BlackBerry 10 will only blink RED LIGHT!

Step 4 
Open the autoloader file you downloaded on Step 1 and plug your blackberry 10.
Allow the autoloader to finish running.
Then remove your BlackBerry 10.3.3 from PC.
The BlackBerry only blinks RED light, don't panic!

You may like this solution How to Bypass FRP on androids

Step 5
Open the autoloader file you downloaded on Step 2 and plug your blackberry 10.
Allow the autoloader to finish running.
Then remove your BlackBerry 10.3.3 from PC
Follow all the process of setup and configure your BlackBerry 10.
This particular process if followed carefully will remove anti theft on any BlackBerry with version 10.3.3.

Alas your BlackBerry is back to life

How to bypass Blackberry Z30 10.3.3 anti theft or ID

How to bypass Z30 10.3.3 anti theft



Did you forget your BlackBerry Z30 password?
And average technician knows that when it comes to remove BlackBerry Z30 ID or anti theft on any BlackBerry 10.3.3 is not easy unless you use Chimera Tool.

Here, we are going to show you a trick that you can use and do it successfully.
This particular procedure has been tested 100% in our various workshops. But remember we are not responsible for any damage on your your BlackBerry. Do this on your own risk.

 What you need to remove anti theft on BB 10 10.3.3

  • A good working PC.
  • Charge your battery to about 100%.
  • Find a good USB for the work.
  • Go to blackberry link and download BlackBerry drivers.
  • Install the drivers on your PC
  • Close any other related Blackberry applications running on your PC.
  • If your are steady check the Steps below:


Step 1 
Download this file (autoloader) Q10_10.3.01.2267_SQN100-1-2-3-4-5 work with all slim tech from here or here.
Save the file on a folder you will remember.

Step 2
Go to this website and download your particular BlackBerry phone autoloader file, Lets say BlackBerry Q10 or BlackBerry Z30.
Save the file on a folder you will remember.


Step 3 
If your BlackBerry 10 has a detachable battery, then remove the battery.
And the Black Berry 10 for sometimes without battery.

Note:
The file you downloaded on Step 1 is BlackBerry 10.3.01, so when you flash it on 10.3.3, your BlackBerry 10 will only blink RED LIGHT!

Step 4 
Open the autoloader file you downloaded on Step 1 and plug your blackberry 10.
Allow the autoloader to finish running.
Then remove your BlackBerry 10.3.3 from PC.
The BlackBerry only blinks RED light, don't panic!

You may like this solution How to Bypass FRP on androids

Step 5
Open the autoloader file you downloaded on Step 2 and plug your blackberry 10.
Allow the autoloader to finish running.
Then remove your BlackBerry 10.3.3 from PC
Follow all the process of setup and configure your BlackBerry 10.
This particular process if followed carefully will remove anti theft on any BlackBerry with version 10.3.3.

Alas your BlackBerry is back to life

How to bypass Blackberry Z3 10.3.3 anti theft or ID

How to bypass Z3 10.3.3 anti theft




Did you forget your BlackBerry Z3 password?
And average technician knows that when it comes to remove BlackBerry Z3 ID or anti theft on any BlackBerry 10.3.3 is not easy unless you use Chimera Tool.

Here, we are going to show you a trick that you can use and do it successfully.
This particular procedure has been tested 100% in our various workshops. But remember we are not responsible for any damage on your your BlackBerry. Do this on your own risk.

 What you need to remove anti theft on BB 10 10.3.3

  • A good working PC.
  • Charge your battery to about 100%.
  • Find a good USB for the work.
  • Go to blackberry link and download BlackBerry drivers.
  • Install the drivers on your PC
  • Close any other related Blackberry applications running on your PC.
  • If your are steady check the Steps below:


Step 1 
Download this file (autoloader) Q10_10.3.01.2267_SQN100-1-2-3-4-5 work with all slim tech from here or here.
Save the file on a folder you will remember.

Step 2
Go to this website and download your particular BlackBerry phone autoloader file, Lets say BlackBerry Q10 or BlackBerry Z30.
Save the file on a folder you will remember.

Step 3 
If your BlackBerry 10 has a detachable battery, then remove the battery.
And the Black Berry 10 for sometimes without battery.

Note:
The file you downloaded on Step 1 is BlackBerry 10.3.01, so when you flash it on 10.3.3, your BlackBerry 10 will only blink RED LIGHT!

Step 4 
Open the autoloader file you downloaded on Step 1 and plug your blackberry 10.
Allow the autoloader to finish running.
Then remove your BlackBerry 10.3.3 from PC.
The BlackBerry only blinks RED light, don't panic!

You may like this solution How to Bypass FRP on androids

Step 5
Open the autoloader file you downloaded on Step 2 and plug your blackberry 10.
Allow the autoloader to finish running.
Then remove your BlackBerry 10.3.3 from PC
Follow all the process of setup and configure your BlackBerry 10.
This particular process if followed carefully will remove anti theft on any BlackBerry with version 10.3.3.

Alas your BlackBerry is back to life

How to bypass Blackberry Z10 10.3.3 anti theft or ID

How to bypass Z10 10.3.3 anti theft


Did you forget your BlackBerry Z10 password?

And average technician knows that when it comes to remove BlackBerry Z10 ID or anti theft on any BlackBerry 10.3.3 is not easy unless you use Chimera Tool.

Here, we are going to show you a trick that you can use and do it successfully.
This particular procedure has been tested 100% in our various workshops. But remember we are not responsible for any damage on your your BlackBerry. Do this on your own risk.

 What you need to remove anti theft on BB 10 10.3.3

  • A good working PC.
  • Charge your battery to about 100%.
  • Find a good USB for the work.
  • Go to blackberry link and download BlackBerry drivers.
  • Install the drivers on your PC
  • Close any other related Blackberry applications running on your PC.
  • If your are steady check the Steps below:


Step 1 
Download this file (autoloader) Q10_10.3.01.2267_SQN100-1-2-3-4-5 work with all slim tech from here or here.
Save the file on a folder you will remember.

Step 2
Go to this website and download your particular BlackBerry phone autoloader file, Lets say BlackBerry Q10 or BlackBerry Z30.
Save the file on a folder you will remember.

Step 3 
If your BlackBerry 10 has a detachable battery, then remove the battery.
And the Black Berry 10 for sometimes without battery.

Note:
The file you downloaded on Step 1 is BlackBerry 10.3.01, so when you flash it on 10.3.3, your BlackBerry 10 will only blink RED LIGHT!

Step 4 
Open the autoloader file you downloaded on Step 1 and plug your blackberry 10.
Allow the autoloader to finish running.
Then remove your BlackBerry 10.3.3 from PC.
The BlackBerry only blinks RED light, don't panic!

You may like this solution How to Bypass FRP on androids

Step 5
Open the autoloader file you downloaded on Step 2 and plug your blackberry 10.
Allow the autoloader to finish running.
Then remove your BlackBerry 10.3.3 from PC
Follow all the process of setup and configure your BlackBerry 10.
This particular process if followed carefully will remove anti theft on any BlackBerry with version 10.3.3.

Alas your BlackBerry is back to life

Saturday, 16 December 2017

How to remove Nokia TA-1010 or Tenna password

What you need to remove Nokia TA-1010 security code

How to remove Nokia TA-1010 code

 


  • get your PC ready.
  • Get Miracle Box or Cracked ready
  • Charge your batery around 80%.
  • Install Miracle Box and Nokia MTK drivers.
  • Get your USB cable ready.
  • Connect Nokia TA-1010 also called Nokia 105 (new) or Tenna to the Miracle Box through USB. 


Remove Nokia TA-1010 battery.
Insert the USB to the phone.
Insert the removed battery to the phone back.
Press your Nokia TA-1010 power button shortly and leave the button as soon as you see connected on Miracle Box interface


You can watch the Video here

Ensure that you did the following

  1. Select MTK on the Miracle Box
  2. Select boot 12.........
  3. Click Read info....
  4. Click Read Unlock/imei
After read the information the unlock password or security code will be shown. Then copy and enter the security code manually.
To be on safe side avoid formatting the phone.

You may Like the following:

How to remove Nokia code without flashing

Download tested Nokia flash files.

Nokia 130 RM-1035 power solution

How to flash Nokia 220 and Nokia 225 without charging USB

if you love US hit us with comments and tell others

How to flash Nokia asha 302 RM-813 and download flash file

The post show you how to flash Nokia 302 RM-813.


How to flash Nokia asha 302  RM-813


Caution: This particular Nokia has a problem of corrupt file, can't show text messages and miss calls. You can flash only the image file

Most causes of Nokia phone flashing

  1. Water damage is a major factor for Nokia phones to not coming on.
  2. Memory problem, here as you keep on installing applications and download different file, a time will come when the cache will be filled up.
  3. Hitting or falling on Hard object:- when you phone drops is either is gone or need repair, where flashing is one of them.
  4. Installing a wrong or corrupt file or application.
  5. Flashing  a Nokia phone with wrong Nokia file, this may cause corrupt imei.
  6. Insert of corrupt or affected memory card.
  7. Receiving corrupt file through bluetooth.
  8. General software corrupt. 

What you need to flash Nokia 105 RM-908

  • Nokia software updater.
  • A working computer.
  • Nokia USB cable.
  • A working Nokia Battery charged to about 80%.
  • Nokia connectivity driver.
  • Nokia BB5 drivers.
  • Nokia flashing Box like ATF Box or JAF Box etc
You may Like How to read Nokia password without Flashing

How to Flash Nokia 302 RM-813

  1. Open the ATF box or any other flashing Box computer interface.
  2. Connect your Nokia 105
  3. Remove the battery
  4. Load the firmware
  5. Choose flash
  6. Insert the battery
  7. Press the power button shortly.
  8. If it gets connected the drop the phone gently.
  9. give it some time for flashing to complete.
  10. Disconnect you phone from computer
  11. Power the phone
  12. Setup up you phone if flashing was successful otherwise you flash again.

Download Nokia 302  RM-813 flash file here.

How to remove Blackberry anti theft or blackberry ID on 10.3.3

How to remove Blackberry anti theft or Blackberry  ID from version 10.3.3


How to remove Blackberry anti theft or blackberry ID on 10.3.3



And average technician knows that when it comes to remove BlackBerry 10 ID or anti theft on any BlackBerry 10.3.3 is not easy unless you use Chimera Tool.

Here, we are going to show you a trick that you can use and do it successfully.
This particular procedure has been tested 100% in our various workshops. But remember we are not responsible for any damage on your your BlackBerry. Do this on your own risk.


 What you need to remove anti theft on BB 10 10.3.3

  • A good working PC.
  • Charge your battery to about 100%.
  • Find a good USB for the work.
  • Go to blackberry link and download BlackBerry drivers.
  • Install the drivers on your PC
  • Close any other related Blackberry applications running on your PC.
  • If your are steady check the Steps below:


Step 1 
Download this file (autoloader) Q10_10.3.01.2267_SQN100-1-2-3-4-5 work with all slim tech from here or here.
Save the file on a folder you will remember.

Step 2
Go to this website and download your particular BlackBerry phone autoloader file, Lets say BlackBerry Q10 or BlackBerry Z30.
Save the file on a folder you will remember.

Step 3 
If your BlackBerry 10 has a detachable battery, then remove the battery.
And the Black Berry 10 for sometimes without battery.

Note:
The file you downloaded on Step 1 is BlackBerry 10.3.01, so when you flash it on 10.3.3, your BlackBerry 10 will only blink RED LIGHT!

Step 4 
Open the autoloader file you downloaded on Step 1 and plug your blackberry 10.
Allow the autoloader to finish running.
Then remove your BlackBerry 10.3.3 from PC.
The BlackBerry only blinks RED light, don't panic!

You may like this solution How to Bypass FRP on androids

Step 5
Open the autoloader file you downloaded on Step 2 and plug your blackberry 10.
Allow the autoloader to finish running.
Then remove your BlackBerry 10.3.3 from PC
Follow all the process of setup and configure your BlackBerry 10.
This particular process if followed carefully will remove anti theft on any BlackBerry with version 10.3.3.
Alas your BlackBerry is back to life

Thursday, 7 December 2017

infinix Smart X5010 hard reset, pattern removal and frp bypass

infinix Smart X5010 hard reset


Did you android enter privacy lock, password, and pattern or enter gooogle account.

The solution is here. Just follow the instructions 

Step 1

·                     Charge your infinix Smart X5010 battery about 80%.

infinix Hot 4 Pro X556 hard reset, pattern removal and frp bypass

infinix Hot 4 Pro  X556 hard reset


Did you android enter privacy lock, password, and pattern or enter gooogle account.

The solution is here. Just follow the instructions 

Step 1

·                     Charge your infinix Hot 4 Pro battery about 80%.

·                     Power off infinix Hot 4 Pro android smart phone

·                     Leave the phone for about 5 minutes

·                     Press and hold Volume Up with Power button simultaneously

·                     If your enter fastboot mode

·                     Use your Volume Up to select factory reset

·                     Use Volume Up also to choose yes reset all

·                     Allow the android to perform the factory finish 

·                     When it returns to reboot, select it and allow it for some time to boot.

·                     If the setup enter google account or frp bypass, then jump to Step 4.

·                     If you get imei null or invalid check here

Step 2

Use Miracle Box you can download the crack from here

We recommend you use Mirecle Box CRACK because it doesn’t require any box and can be saver for android operation more than any other Flashing Box.

Just follow the instruction on android hard reset

Open the box interface, select MTK, select read phone, select format phone.
Step 3

The use of Volcano Box

We recommend this particular Box when dealing with the android Privacy Lock

This Box can safely reset android privacy lock code with the android having issues.

We have tested this particular Flashing Box on many android phones without any problem. The Volcano Box is safe for android privacy code removal.

Note: Privacy code is different from android normal PIN Code as PIN can easily be removed with factory reset or hard reset but privacy code can’t.

Download Tecno Stock ROMs here

Download itel flash files here


Step 4

Google account removal or frp bypass of android 5.0 and above. FRP bypass is just a way you can use to bypass that stage of android boot that requires google account.

When you talk about MTK androids and SPD androids phones this is easy but if it is Samsung android phones, check solution here.

One can use Miracle Box here and follow these instructions.

Use Google manage and QuickShortcutMaker

Use method with  Miracle Crack Box or Volcano box.