New solutions

Wednesday, 30 November 2016

Setool Box and Flashing

SeTool is another powerful device for read, write, unlock and upgrade Sony Ericsson, Lg and few Samsung smart phones. Like other flashing boxes: UFS3, z3x this particular box is unique because the interface is easier to work with but a little mistake can kill your phone.
SeTool Box

How to Use Setool Box

  1. Download the file FARManager for accessing cid49 from my folder.

  2. Now first we need to patch the MAIN for making it compatible with FarManager.

  3. Unrar it to your chosen destination.

  4. For this download Phone-XS beta 2.01 from my folder. Enter settings as shown.

  5. To Converting k750i to w800i It should either be CID49 or CID36.

  6. Select only if your phone is cid49 as this tutorial is for cid49 phones only which it would be probably if its not more than 1 year old.

  7.  Now proceed to the Flash screen (in configuration at bottom)

  8. .In the main firmware box select the Path to the Plugins folder in FarManagers folder (In my case C:\ Farmanager for accessing cid49\Far\Plugins).Select the k750w800_r2e_dcu.49r.sswfile here. 5.Remember to check on th Flash Main Firmwware box. 6.Hit Flash.5 Flashblocks will be loaded and patching would finish within 20
    seconds.(If your phone turns on after connecting then you will have to install the USB Flash Drivers again. Refer tutorial 1(converting k750i to w800i) for the procedure.The drivers are uploaded in my folder.)

  9. Now close PhoneXS. Unplug the phone.Re-insert the battery to refresh the phone.

  10. Start Far Manager.PressF.

  11. A box will appear and the 2nd last option would be named S.E.F.PPlugin.Select it.

  12. NOW BE VERY CAREFUL ON THE NEXT SCREEN.SELECT Device:DCU60, Speed: 921600, Boot Script: (According to phone model) k750_w800_CID49.

  13. Hit enter the matrix. Connect your phone according to the instructions After a few seconds two folders by the nameFLASH andFS will be shown on the left side .On the right side you can see your hard-drive contents.

  14. Now double click on FS.it will take some time to break into FS. 12.You will seesome folders named ifs,tpa,etc. Double click on ifs and go to ifs>settings>acoustic. Before copying the new acoustics, take a backup of the original ones, so that in case anything goes wrong you can revert back to the originals. For this click anywhere on the right side of the far manager screen, showing your hard-drive contents. PressF7.A new folder would be created. Name
    it \u201cBackup\u201d.

Setool Box Flashing




Please you can ask question.

Tuesday, 29 November 2016

UFS3 Box and Flashing

UFS3 is one of the oldest phone flasing box just like Jaf Box but the advatage of UFS3 box is that it can be used for different kind of phones unlike the latter.


Presently the flashing box can be activated to work with most recent phones including android 
phones.



UFS3


How to activate UFS3 box


open ufs panel.

scan box.

check box.

update box finish.

Go to software section.

check server.

Install all the necessary missing files.

UFS3 box android supports


Unlike Cyclone Box Those users with these kind of UFS3 boxes UFST and UFS Turbo Only can supports the following androids.

G360AZ, G531F, G531H, G531M, G531Y, T239, T239M, T561M, T561Y, T562 404SC, G920R6, G920R7, G925R6, G925R7, J5008, J500F, J7008

Use google to check for others phones.
How to flash phone with UFS3 Box



Activate your UFS3 box.

Download UFS3 box software or Jaf box PKEY emulator.

Connect the Box with the connect button.
UFS3 UFS phone flashing

Open the back of the Nokia and check for these informations:

TYPE

MODEL

CODE

Use the information to download the flashfile of the phone. Save the file where you will remember and ensure that you extract the file.

Check the cable that will match the phone.

From the picture click check the phone.

Click load the MCU.

Click load the PPM.

Click load the CNT.

You can add the PM if necessary.

Then click Flashing.

If you are connecting through USB cable the case is different because USB box must be checked. Having got the basic idea on how to use the UFS3 box it can also be used for other function like:

Nokia network unlock.

To reset Nokia, Samsung, LG, Alcatel, etc security code.

This particular flashing Box is good for formatting phone that is when phone memory is cluster and the phone is hanging or lagging. Then this tool is good for that.

Upcoming Sony Ericsson FlashTool.

Monday, 28 November 2016

Z3X Box and Flashing

Z3x Box

Z3X is just like other for instance Volcano Box is a phone repairing and flashing box used for mainly Samsung phones. Upon activation it can be used to for LG phones and other smartphones. It is good in network unlock and fast in opertion but sometimes it has driver problem.
Recent phones added for Z3X operation


-Added E1172 flash, read code, unlock, imei repair first in the world

- Added C3782 flash, read code, unlock, imei repair first in the world

- Added E2252 flash, read code, unlock, imei repair first in the world

- Added T379 read codes

- Added S5229 flash, read code, unlock, imei repair

- samsung t337a unlock done.



How to unlock Samsung network with Z3x
Get Micro-USB cable.

Phone must be powered on.

Type *#0808# and select 'DM+MODEM+ADB'.

Type *#9090# and choose USB (or 'DM/DUN over HSIC').

Reboot phone.

Select Samsung diagnostic port in port settings.

Connect USB cable, install drivers if needed.

Press 'Unlock' button for direct unlock.



How to reset Google account activation or Samsung reactivation lock with Z3x.




Step 1

Download and install ADB.

Download samsung firmware and remove sBoot file.

Connect phone to PC with USB cable, install drivers if needed.

Select device in ADB settings.

Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock.

Hard reset the samsung after Reset FRP.

Ensure USB debugging and oem unlock are activated.



How to flash Samsung with Z3X




Lets use Samsung S532o

Go to samfile on Z3x support and download the said file.

Install the driver of Samsung S5320.

Prepare the usb for computer connection.

Open the Z3x box interface and load the three files,


If everything is ok at this stage then. Remove the battery for 5 seconds and reinsert it back.


Press the power for some seconds and connect the USB.

Then your Samsung S5320 will flash with the loaded flash file.










Follow the instructions carefully.

Saturday, 26 November 2016

Jaf Box and Flashing

JAF  Box is a device connect to computer with a software for flashing mainly Nokia phones. It can also read the nokia password and unlock the network. This device is just like Volcano boxMiracle Box and Cyclone Box. The box is so powerful that it has lasted for years.

How to Use Jaf Box



  1. buy Jaf box and the PKey dongle.

  2. First Download JAF Software.

  3. You can use PKEY emulator.

  4. Extract and install Jaf box software.

  5. Also install the PKey driver or use emulator.

  6. Lets test a DCT4 phone like Nokia 2630c

  7. Since you have installed the Box succefully then just get a Jaf direct cable for Nokia 2630c and connect the phone to computer.

  8. Check the image below and tick user code edit

Jaf interface



The password of the phone will show. Otherwise click factory reset button. If you follow the instruction carefully your phone will reset to default factory.

Jaf Box Nokia BB5 Flashing

Unlike the DCT4 Nokia phone Jaf Box flashing BB5 is different in the sense that it uses another software interface. According to the image below.

Jaf BB5 flashng



Steps

  1. Lets take Nokia 5130c to flash for example.

  2. Find the match cable from Jaf Box cables.

  3. Connect the phone to the Jaf Box.

  4. Go online and download the particular flash file.

  5. Extract the flash file and look for MCU, PPM and CNT.

  6. Click check button to ensure phone is connected.

  7. Load MCU, PPM and CNT following the arrow directions.

  8. Check other boxes according to the arrow directions.

  9. If everything is ready then click flash button.

  10. Wait for a while why your phone complete flashing.

If you follow the instruction accordingly then you have succeeded in flashing your Nokia 5130c.

Jaf Box and PKey can also be used for Nokia network unlock and to repair dead Nokia phone. Is very good in Flashing Nokia.

Thursday, 24 November 2016

Tecno Y6 power solution

Today we are going to show you how to fix Tecno Y6 power solution. Most of the time due to careless your phone may drop on a liquid not knowing. The liquid becomes a big problem to your phone as it will start reacting with the tiny ics components in the panel. Which may result in phone not booting on coming on.

Read Water damage phone

Steps to fix Tecno Y6 power problem



  1. Loose the Tecno Y6.

  2. Check the panel for water damage.

  3. Clean the panel off dirt.

  4. Check for (according to the image below) for GND and PWR gold points short the two points.

  5. Fix your battery and see if the phone comes on. if yes then power button is faulty.

Tecno Y6 power solution



Gently remove the the power-volume-button flex as indicated in the diagram below.


Tecno Y6 power solution

How to make connections to Tecno Y6


following the image below:

Tecno Y6 power solution



  • Use a sharp blade to clean the terminals.

  • Get two connecting wires.

  • A soldering paste and soldering iron.

  • Your common sense is important here.

  • Looking at the power flex.

  • Connect terminal 1 and terminal 5 respectively for the power points.

  • Return the flex gently and power Tecno Y6

  • If your the instruction carefully the phone should be on and able to be controlled with the power switch.

Conclusion


The solution to Tecno Y6 power problem Zamdtek posted here has been tested in our workshop. We don’t take any responsibility whatever if anything go wrong in cause of your own work . We repeat this and loud please do it at your own risk. You can ask us how. Use this guide at your own risk. Zamdtek shall not have any liability or responsibility for whatever happens to you and your device by using the instructions in this guide.

Hit us with comments.

How to flash Samsung with Odin and download ROM

Odin is a computer based program interface just like Research download tool and SP tool which is used to install / flash ROM Samsung Android device smartphones. Just like Research download tool which is used for flashing and upgrading SPD android phones and SP tool used for flashing MTK based phones, Odin is mainly used for Samsung android phones.

Odin for samsung flashing


How to use Odin

1. Install USB drivers for your device on your PC. This driver can be gotten from Kies samsung software but after downloading Kies you must close the software.

2: Backup your Samsung phone if it can still come up.

3: Ensure that the battery level should be around 60-80%. The more the better.

4: If your phone can still boot then, USB Debugging should be enabled on your device.


How to install or flash samsung with odin

  1. Download the official firmware zip package for the particular  device from here Samsung ROMs. Then extract the downloaded zip file. After extraction, you will either get one .tar / .tar.md5 file or will get multiple files.

  2. Download Odin3_v3.07.zip and extract the downloaded zip file. You will get following files: Odin3 v3.07.exe, Odin3.ini, tmax.dll and zlib.dll

  3. Right click on Odin3 v3.07.exe and run it as administrator to start Odin.

  4.  Boot your device in download mode. For most Samsung devices, you will need to do this:

Switch your device off.
Press & hold Power + Home + Volume down buttons till you see a triangle and Android robot.
Now press the Volume up button to confirm entering the download mode.
Once it is in download mode, connect your device to the computer via USB cable.

When your device is connected, one of Odin ID:COM boxes will turn yellow and display the COM port number.

Note Before you open Odin make sure you have connected your samsung phone for easy connection.

If you do not see the port number in any of ID:COM boxes or if the box does not turn yellow, please do not proceed and check if the USB drivers are installed correctly and the device is connected via USB.

5.If the firmware zip package had just one file, click on PDA button, then browse and select the firmware file (.tar or .tar.md5).
If not:

6: If the firmware package had multiple files:

Click on PDA button, then browse and select the file that has CODE / PDA in its name.
Click on Phone button and select the file that has MODEM in its name.
Click on CSC button and select the file with CSC in its name.
Skip any files that you did not find in the package.

Leave the check boxes the way they are"

Auto Reboot and F. Reset Time checkboxes should be selected
All other checkboxes should be unchecked.
Step 8: After selecting the appropriate files, click on “Start” button in Odin.

This will kick off the process to flash the ROM. Please do not disconnect your device during the process.

Step 9: Once flashing is complete, your device will reboot. You can now disconnect from the PC and start using it.



Alas! You can use Odin in these  steps to flash ROM on your samsung Android device using Odin.

However, try this at your own risk. We will not be responsible for any hard done to your device.

Miracle Box and flashing

Get everything you need to know about Miracle Box and usage.


Just like Volcano Box, Miracle box is a device that can be used for china phone read, repair, write imei and upgrade. This kind of phone flash device is so powerful that it can read file, write the file and unlock both password and network.

The set of phone it can work for ranges from china MTK, SPD phones to Samsung reset, Blackberry unlock Nokia read, write and format. It also read, write and unlock LG, Huawei and all most all android wipe data and rest.

How to use Miracle Box


Steps

miracle box and uses



You can watch video here China phone flashing video
  1. Buy a Miracle box.

  2. Create an email account.

  3. Download old Miracle box software.

  4. Download the Miracle box driver separately

  5. Run the Miracle box setup.

  6. Register the miracle box with the dealer you bought from.

  7. Click on the Connect box button as in image above.

  8. Select the kind of job you want to do according to the diagram above.

  9. Before you do anything with the Miracle box always backup the phone flash file in case something goes wrong.

  10. Save the file where you can remember for further use.

There are 3 different ways to connect a phone to Miracle box

  1. Through the use of Jaf RJ45 cable

  2. The use of Miracle Box follow cables which comes along the flashing box.

  3. Through the use of USB cable. Here you need to download SPD drivers, MTK drivers, Coolsand drivers and so on.

The advantage of this  Miracle box is that unlike other China phones flashing box, you have confident working with it. Once you backup the china phone flash file.  If you phone is dead at the end of the operation just go back to the folder where you save the flash file and write the file back to the phone.

Hit us with questions!

Wednesday, 23 November 2016

spd sc7715 flashing failed incomplete partition solution


Just as we have shown you on how to use Research download and Upgrade download tool.  Bear it in mind that it is not all SPD android that you can just write, flash or upgrade without any problem. Sometimes you get this error while flashing SPD android with Research or Upgrade download tool spd sc7715 flashing failed incomplete partition.

Don't panic  read down as we bring the best solution for this kind of problem.

Steps on how to solve spd sc7715 flashing failed incomplete partition

  • Take a look at the image below. 
spd sc7715 flashing failed incomplete partition solution

spd sc7715 flashing failed-incomplete partition  solution

  • Click on the research download settings.

  • untick 3rd 4th 5th 6th options below fdl 1 and fdl2 box.

  • I advice you use Research download 2.9.9005 and below version.

  • Then you click starts button.

  • Wait for about 30 minutes for the flashing to be concluded.

  • If the problem continues then is time you download another file.

  • After trying another file and still the same the use Miracle Box.

How to use Miracle Box and flash SPD android phone

Steps

  1. Get a working the same type of SPD android phone.

  2. Connect your Miracle box to the computer.

  3. Get a working USB cable and working brain.

  4. Open the Miracle box interface.

  5. Select Read file.

  6. Hold Up of the android phone.

  7. Connect the phone to USB and allow it to read the flash file.

  8. Save the file to a location where you can remember.

  9. Bring the bricked SPD phone do step 6.

  10. Connect the phone to USB and select write file.

  11. Allow the phone to write the file finish

  12. Then your phone is back to life.

If these two methods failed it means your SPD android is hard bricked. By following these instructions carefully spd sc7715 flashing failed incomplete partition is 100% solved.

Hit us with your comments or observation. If we help you say thanks and tell others.

Coming search how to connect android to Window 7 that requires Window XP.........

How to repair Bricked or dead BLU

How to repair Bricked BLU


Here, we are going to see how to fix bricked BLU andriod smartphone. It is still very much unknown what can cause some android phone to bricked or hangs on logo. But recently I came to find out that excessive browsing without active antivirus is one of the major factor.

Again, if you like to transfer music from your to another and also connect from people then you must pick virus that can brick your phone any moment.

BLU android


Steps on How to unbrick bricked BLU android phone.

  • Get a working USB cable.

  • Get a working common sense

  • Get your computer ready

  • Download SP Tool software.

  • Learn how to us SP Tool here.

  • Check the model of your BLU android.

  • Go online and download the scatter file.

  • Safe your scatter file where you will remember.

BLU android


How to repair Bricked BLU
  • Load the BLU scatter file on sp tool.

  • Uncheck preloader box.

  • Click download button.

  • Remove the smartphone battery .

  • Insert USB cable put the battery back.

  • The BLU android will start downloading.

  • Wait till you see passed or OK on sp tool.

Another way to flash or unbrick this BLU android is the use of Miracle box or Volcano box.
  • Connect your Flashing box with computer.

  • Open the software interface.

  • Select write software.

  • Load the scatter file just like sp tool.

  • Connect your BLU android with USB.

  • Remove the battery.

  • Reinsert the battery.

  • Then flashing will start wait until is done.

After this your phone will take much time for the first boot. If it doesn't boot then you have to do manual hard reset. Some times it may require you to write imei  it it show "imei null on invaliid".

If you follow the above process carefully and flash with correct scatter file then your phone will be back to normal.

If we help you hit us with comment.

Research download and Upgrade download tools

What is Research download and Upgrade download tools?


These two mentioned tools are computer based software that are used to flash and upgrade SPD android phones.  There are two available tools for flashing .pac file to Android device and mostly an Spreadtrum chipset.

    a.Research Download Tool and

     b.Upgrade Download Tool.

These tools allows you to flash .pac firmware but it is important to know how to use it. Let me show you how research SPD Download Tool / SPD Upgrade Tool are been used.

Note: Get these ready before you use Research/Upgrade tool

  • Desktop with Windows operating system (preferable Win 7)
    .pac file to be flash (your device firmware)

  • Spreadtrum Drivers.

  • SPD Download Tool R2.9.7.002.

  • Install SPD drivers.

Check itel 1556 plus frp bypass

How to use research or upgrade download tool

  1. Open Research Download folder and run ResearchDownload.exe. Load the packet file or .pac file.
Research download for spd android


2.  Click the first gear icon and locate the .pac file.


Research download for spd android



3.load packet pac file and it will appear as shown in the image below.

Research download for spd android


4. If you want to change flash settings. Click the second gear icon. But I recommend to leave the settings to default.

Research download for spd android


5. Then spd download tool flash settings will popup and you make your selections according to your wishes.

Research download for spd android


6. After selections you click ok and return to the main research download.
7. Now click the arrow to begin flashing. See the image below.
flash pac file.

Research download for spd android


When you’re done clicking the arrow, turn off your Android phone and wait for atleast 15 seconds. Grab the usb cable, hold volume down and plug your device into the computer. The process should start automatically. You can now release the volume button.

Note: This will take about 30 minutes to an hour depends on the size of the pac file.

8. When you see passed then viola everything is successful!

Research download for spd android


If we helped you say thanks. This is how Research or Upgrade download tool works.

Huawei S7-105 Tab Hard Reset

Huawei S7-105 hard reset

Huawei S7-105 Tab Hard Reset with Miracle box

Lets see how to hard reset Huawei S7-105 tab. This is for educational purposes unless you forget your password. I have read online where many people claimed to have done hard reset to this particular phone with button combinations. I don't think if this is true. Here let me present two important steps involved in Huawei S7 Tab hard reset.

Step 1 Huawei S7-105 reset put it in fastboot mode

  • Charge the battery up to 50%

  • Press Vol + and power till first Huawei logo appears then immediately release only power button.

  • keep pressing Vol+ till the device is in fastboot mode(BLUE BLANK SCREEN).

  •  Connect your device to computer & install fastboot drivers.

Step 1 Huawei S7-105 reset use Volcano box or Miracle box

  • Open the software interface.

  • Select android option.

  • Choose fastboot from the android.

  • Connect the Huawei S7-105 ideos with USB cable.

  • Allow the drivers to be installed.

  • Click on wipe data.

  • If the phone is properly installed the hard reset will automatically be performed.

By now the your Huawei S7-105 ideos is set the factory reset so you have to set up the phone from begging. This is the best and known way to hard reset Huawei S7-105 tab ideos.


Disclaimer

Factory Hard reset will set your telephone in original factory settings. It will expel every one of the information and applications that you introduced. Your contacts will be evacuated and you need to include them once more. Zamdtek is not responsible for any damages that may happened due to using this guide to your phone. If any problem happened that related to flashing instructions, Zamdtek will help you to solve it. This is for educational purposes.

Zamdtek is associate with wireless organizations like Huawei and some other and so forth Makers/Merchants .All trademarks are the property of the particular trademark owners. Zamdtek simply give outlines to ponder and repairing reason.

iPad,iPhone disabled connect to itune solution

Pad iPhone disabled connect to iTune solution


Lets see how it is easy to fix or go about "iPhone or iPod is disabled connect to iTune". This particular issue is been caused when someone mistakenly or intentionally entered incorrect passcode for 10 times in any apple device like iPhone, iPod or ipad. The the phone will lock itself but though this feature can only be activated during security setup.

How to fix iPhone disabled 
Go to iTunes and download latest. 

Open downloaded iTunes and install it. 

Open the software after installation and allow it to install drivers. 

Check the apple device model number at the back of the device according to picture below.


iPhone disabled connect to itune



With the model number noted go to iOs ipsw download to download the particular device iOS latest or older version depends on your choice. Then save the file to a folder where you can remember. Before we continue we need to put the apple(iPhone, iPad) device in DFU Mode.


How to put iPhone to DFU Mode 

Plug your device into your computer with the matchable device USB cable. 

Turn off the device. 

Hold the Power button for 3 seconds. 

Hold the Home and Power buttons for 10 seconds. 

Release the Power button but keep holding the Home button 

iPhone in dfu or flashing mode


Update apple device with iTunes 
Open iTunes 

Open itune

The iPhone will be detected automatically
Looking the above picture carefully before you click ok button, then press and hold computer 'Shift key' this will popup a folder. 
Then locate your downloaded iOS and select.

iPhone connected to iTune
 

With your mind relaxed take a tea cup and wait. 

Watch the below picture as it install the Iphone or iPad iOS.

iPhone connected



If the process failed you repeat it. when you are done then the iPhone will reboot and you will follow the on-screen instructions to setup the phone.

Ensure you have the necessary answers to all the questions.
i

How to flash android with SP Tool

SP flash tool is a computer based application that is mainly used to flash Stock ROM, Custom recovery and fixing other issues like( firmware update, Flash recovery, unbrick bricked android device etc.).

SmartPhone (SP) FlashTool is working with MediaTek Android smartphones (MTK based). You can Download SP FlashTool from internet. You need to load scatter file for MTK before you can work with SP Tool. This tool can do the work of Miracle box.

How to install MT65xx drivers for your windows PC.

Download MediaTek USB VCOM drivers from here


Uses of SP Tool

  • Advanced Memory testing and verifying androids.

  • Read / Write parameters to android.

  • Erasing / Formatting / Reset Your MTK based device.

  • Flashing to Android stock ROM (scatter based) in android

  • Flash Custom ROM (scatter based) to MTK android.

  • Application for Fixing MTK Bricked android device.

How to connect MTK android with SP Tool


Step 1 if you want to Upgrade MTK

 How to flash or unbrick MTK android with sp tool



Switch off your device
Connect your device

load the MTK scatter file

Select Upgrade option according to diagram

Click DOWNLOAD "button" on top ( not the tab)
It is done and MTK flashTool will do the rest.


step 2 if you want to Flash only without upgrade

Ist choose format option

As indicated by the picture below


SP Tool format option



Switch off your device
Connect your device

load the MTK scatter file

Select Download only option according to diagram


SP Tool Download option



Click DOWNLOAD "button" on top ( not the tab)
It is done and MTK flashTool will do the rest.

Note: preloader option must be unchecked before sp tool downloading. Ensure to use matched scatter file to avoid killing the phone.


Watch How to flash android with SP Tool video here 

If your phone does power after flashing then Kcolo option must be used to recover your bricked MTK android phone.

If you have problem with flashing tool or drivers install MediaTek USB VCOM drivers from this link.

hit us comments

How to Flash Unlock Tecno T605, Itel 2020 without USB port

Tecno T605, Itel 2020 etc  without or bad USB port


Note: before flashing, format and unlock any china phone backup 1st.

China phones no matter the name comes with different chip,

is the chip that matters not the name when it comes to flashing.

the most popular chips are:

   SPD

   Mtk

   CoolSand or RDA

   Infenon 

    MStar 

You will like BLU android Hard Reset


before flashing with any flashing box you must know the chip.

let me show you how to read info, read flash, read password and format this typical mtk without charging port.

step 1

connect the phone with RJ45 since the usb is bad.





Step 2

connect to flashing box.



Tecno T526 unlock code

Step 3

Read info and read flash with the box.



Step 4

Read the code or format if you want.



you can enter the code manually or format.

Please this information is for educational purposes and nothing else!

Zamdtek is not associated with wireless organizations like Nokia, Samsung, Sony Ericsson, Lg,  Motorola and some other and so forth Makers/Merchants . All trademarks are the property of the particular trademark owners. We simply give outlines to ponder and repairing reason.

Factory Hard reset will set your telephone in original factory settings. It will expel every one of the information and applications that you introduced. Your contacts will be deleted and you need to include them once more.

Stock Firmware we attempt to give the best and most recent glimmer records and firmware, Yet we don’t ensure the exactness or similarity of any of the documents. So utilize them at your own hazard!.

Hardware problems:  the solution we posted here has been tested in our workshop. We don’t take any responsibility whatever if anything go wrong in cause of your own work . We repeat this and loud please do it at your own risk. You can ask us how.

done!

Tuesday, 22 November 2016

Volcano Box and Flashing

Volcano box and Uses

Volcano Box


Volcano box is a phone flashing device with the help of softwarte interface uses mainly for china phones like SPD, MTK, CoolSand or RDA, and others. Is also a good device for flashing and network unlocking for BlackBerry, Alcatel, Gretel and others.

Volcano box is powerful service tool, that can read/write flash, repair, unlock many types of chinese phone CPUs including MTK, Infineon, SPD, ADI, MSTAR.


How to use Volcano box and flash china phone

  1. Buy the box.

  2. register the box.

  3. Download the the first Volcano box setup file.

  4. Download the latest Volcano box setup file.

  5. Download the driver according to the window operating system you are using.

  6. Check if the cables are in working conditions

  7. Follow the diagram instructions above depends on what you want to do.

After buying and installing the volcano box is time to take some actions like registering the box and ensuring that it can connect phone.


Connect China phone with Volcano box


Volcano Box flashing


  • Find any China phone locked with password.

  • Check the USB charging port

  • If is bad then use RJ45 Cable and connect the phone

  • Open your Volcano box interface

  • Use your common sense

  • Safe the flash file of the China phone before any operations.

  • Then click read code or format the china phone.

  • If anything goes wrong flash the phone with the backup file.

Now you Volcano box is ready for other usage. Hit us with comments

Disclaimer


Factory Hard reset will set your telephone in original factory settings. It will expel every one of the information and applications that you introduced. Your contacts will be evacuated and you need to include them once more. Zamdtek is not responsible for any damages that may happened due to using this guide to your phone. If any problem happened that related to flashing instructions, Zamdtek will help you to solve it. This is for educational purposes.

Zamdtek is associate with Volcano box company and some other and so forth Makers/Merchants .All trademarks are the property of the particular trademark owners. Zamdtek simply give outlines to ponder and repairing reason.

lenovo tab A5000 power solution

The emergence of all android has shown us that we have to go extra mile to find solution to all different types of android. 


Produced from dfferent companies. On this particular post we going to show show you the solution for Lenove A5000 power solution.

lenovo tab A5000 power solution



Most of inbuilt battery smarthphones have this particular problem of battery drained if left un-charged. If you pick up you Lenovo A5000 galaxy tab one day and it refuse to power on. Just follow the instructions below.

  1. Find screw driver.

  2. Gently unscrew the Lenovo A5000.

  3. Look for the battery connector according to the picture.

  4. Make use of your common sense.

  5. Find blade or sharp object.

  6. Scrap the battery terminal.

  7. Tap coonecting wires to the battery terminal.

  8. Coonect the wires to external charger.

  9. leave it for about 20 to 30 minutes.

  10. Check the battery voltage.
lenovo tab A5000 power solution


Ensure the connect neagtive battery terminal to battery negative

and positive battery terminla to battery positve.

lenovo tab A5000 power solution



If you follow the instruction above carefully, then your Lenovo A5000 smarthphone tab should be back to live. Remeber not to connect the battery terminal wrongly.


Disclaimer

We expect you to ask us question on any solution that is not clear to you before you carry out the work. We always answer any question any moment. Just use our comments section to ask. Please Zamdtek is not responsible for any damages that may happened due to using this guide to your phone. If any problem happened that related to flashing instructions, Zamdtek will help you to solve it. This is for educational purposes.

Zamdtek is associate with wireless organizations like Lenovo  and some other and so forth Makers/Merchants .All trademarks are the property of the particular trademark owners. Zamdtek simply give outlines to ponder and repairing reason.

Nokia 1280 and Nokia 103 insert sim solution

Nokia 1280 & 103 insert sim solution


Nokia is the most popular and common phone, owing to this, it can easily breakdown. This is cause may be by some liquid, fluid or dust that can cause some tiny components to start rusting. So becuase of this is always advisable to get small technical knowledge on how to fix your phones. lets discuss on how tp fix Nokia 1280 or 103 insert simcard.

Nokia 1280 and Nokia 103 insert sim solution


What you need for nokia 1280 & 103 insert sim solution

  1. Soldering iron

  2. Connecting wires

  3. Soldering paste and lead

  4. Set of screw drivers

  5. Common sense very important
Nokia 1280 and Nokia 103 insert sim solution


When you loose the nokia 1280 or 103 the first thing you do is to clean the panel or board of dirt, secondly observe the phone for physical damages, thirdly heat the panel lightly with rework station.

Next, follow the diagram carefully and connect the connecting wires with the help of soldering iron and soldering paste. Use your common sense to avoid causing more harm to the phone. If you follow the diagram you must fix your nokia 1280 or 103 insert simcard solution. If you miss any step go back and start afresh from the beginning.


Disclaimer

We try as much as we can to give you a tested solution then www.zamdtek.com is not responsible for any damages that may happened due to using this guide to your phone. If any problem happened that related to flashing instructions, Zamdtek will help you to solve it. This is for educational purposes.

Zamdtek is associate with wireless organizations like nokia  and some other and so forth Makers/Merchants . All trademarks are the property of the particular trademark owners. Zamdtek simply give outlines to ponder and repairing reason.

You can hit us with your comments, we will appreciate try to help you the way we can. SAFE WORK AHEAD!

Wednesday, 9 November 2016

Whatsapp force BlackBerry to introduce full Android



How Whatsapp force BlackBerry to full android

Recently Whatsapp announced of dropping Blackberry device, the forced BB to go on full android smart phone

Check out the new DTEK50 blackberry specifications

Fully Android™

Access to over a million apps on Google Play™

5.2” scratch resistant display

Intelligent BlackBerry Keyboard

Convenience Key

8MP front camera with flash and 13MP

auto-focus rear camera

BlackBerry Security that protects the private details of your life from being hacked

Tuesday, 1 November 2016

Hard Reset Gicent Halo Android

How to Hard Reset Gicent Halo 1 Android 5.1

Gicent Halo android


If you have this kind of android that is  Gicent Halo 1 Android 5.1 and mistakenly forget the password or pattern. Do not worry the solution is here. Make sure you stick to the steps outline here.


Step 1

  • Charge the battery of the Gicent Halo 1 Android 5.1 up till 50%

  • Make sure the USB charging port is working

  • Hold the power and Volume - buttons

  • Wait for the phone to enter Fastboot mode

  • Select wipe/clear option

  • Wait for about 5 min for the Gicent Halo 1 Android 5.1 to restarts

  • Your are done.

Step 2

  • Charge the battery of the Gicent Halo 1 Android 5.1 up till 50%

  • Make sure the USB charging port is working

  • Get your USB cord

  • Ensure your Miracle Box is ready

  • This phone is SPD 6820 so that must be selected

  • Read the flash file before anything.

  • If Debugging mode is on then wipe data

  • Or format with Miracle box

Check the picture details information about Gicent Halo 1. It shows clearly that this android is not mtk but spd. As spd care should be taken because china phone flashing box can kill SPD phones.

Gicent Halo hard reset



From the arrows in the diagram it shows that Gicent Halo 1 is an SPD android phone.


Disclaimer

Factory Hard reset will set your telephone in original factory settings. It will expel every one of the information and applications that you introduced. Your contacts will be evacuated and you need to include them once more. Zamdtek is not responsible for any damages that may happened due to using this guide to your phone. If any problem happened that related to flashing instructions, Zamdtek will help you to solve it. This is for educational purposes.

Zamdtek is associate with wireless organizations like Gicent Halo 1 and some other and so forth Makers/Merchants. All trademarks are the property of the particular trademark owners. Zamdtek simply give outlines to ponder and repairing reason.